Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Tutorial
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Links - Developer Zone

Related Links - Products and Services

ADC Settings for Motion Controllers

5 ratings | 3.60 out of 5
Print
Note: The instructions contained in this document are for NI-Motion 6.x or earlier. For instructions for NI-Motion 7.0 or later refer to Measurement & Automation Explorer Help for Motion.

To configure the ADC channel of your motion controller, click the plus sign next to ADC Settings to expand the section.



The right side of the panel will show the following options to configure a channel:



You must enable a channel to use it as an analog input.



The voltage range option allows you to maximize your resolution on the ADC channels.



Click Apply for your new settings to take effect.





5 ratings | 3.60 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).