Supported FieldPoint I/O Modules for the FP-3000
PrintOverview
This article provides information on which FieldPoint I/O modules are supported with the FP-3000 network interface module.
Supported Network Modules
The current firmware of the FP-3000 does not support all FieldPoint I/O modules. The following table lists supported I/O modules. Supported modules are also documented in the FP-3000 User Manual. Channel Type | Supported Module | Block Type |
| Analog Input | FP-AI-100 | Fp Ai 100 |
| FP-AI-110 | Fp Ai 110 | |
| FP-AI-111 | Fp Ai 111 | |
| FP-TC-120 | Fp Tc 120 Fp Tc 120 C (cold junction compensation) | |
| FP-RTD-122 | Fp Rtd 122 | |
| Analog Output | FP-AO-200 | Fp Ao 200 |
| FP-AO-210 | Fp Ao 210 | |
| FP-PWM-520 | Fp Pwm 520 | |
| Discrete Input | FP-DI-300 | Fp Di 300 |
| FP-DI-301 | Fp Di 301 | |
| FP-DI-330 | Fp Di 330 | |
| Discrete Output | FP-DO-400 | Fp Do 400 Fp Cdo 400 (interlock logic) |
| FP-DO-401 | Fp Do 401 Fp Cdo 401 | |
| FP-DO-403 | Fp Do 403 Fp Cdo 403 | |
| FP-DO-410 | Fp Do 410 Fp Cdo 410 | |
| FP-RLY-420 | Fp Rly 420 Fp Crly 420 (cold junction) | |
| FP-RLY-422 | Fp Rly 422 Fp Crly 422 |
See Also:
FieldPoint FP-3000 Network Module User Manual
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).