Installing a VBScript DataPlugin
Print(Requires: DIAdem 9.0 and above and/or LabVIEW 7.1 and above)
Step 1: Download the *.ZIP installer file to your local hard drive.
Step 2: Unzip the *.ZIP file so that the *.URI file inside is saved to your local hard drive.
Step 3: Double-click on the *.URI file in Windows Explorer.
You are now done!
The DataPlugin is now registered on your computer. Now both DIAdem and LabVIEW can load these data files.
(If you are using DIAdem 9.1, you must now restart DIAdem. )
Reader Comments | Submit a comment »
Please check out the Excel Example DataPlugin
and see how to process Excel data:
http://zone.ni.com/devzone/cda/epd/p/id/5208
Loading Data with a DataPlugin Within LabVIEW:
http://zone.ni.com/devzone/cda/epd/p/id/4181
- Stefan Romainczyk, National Instruments Germany. stefan.romainczyk@ni.com - Mar 31, 2008
How to use
The message:
You are now done!
The DataPlugin is now registered on
your computer. Now both DIAdem and
LabVIEW can load these data files.
is not anough to start with. I still don't
know how to import excel data into
LabView. An example program would be
helpfull.
- Oct 19, 2007
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).