Learn LabVIEW DSP in 3 Hours - Example 6: Stand Alone Operation
PrintLabVIEW DSP has new features like LabVIEW Project
To learn more about this feature follow the link below for step-by-step instructions.
Using the LabVIEW Project with LabView DSP Module
- Switch the execution target to back to the SPEEDY33.
- Open Example 5.vi and download it to flash memory by selecting Tools»DSP Module»Download to Flash Memory. In the dialog box choose the Current VI option and click on Download. Do not disconnect the NI SPEEDY-33 from the host PC while this download is completing.
- When the download to flash memory is complete, close the dialog box, the VI and LabVIEW 7.1 Embedded Edition.
- Disconnect the USB cable from NI SPEEDY-33 and plug a power adapter connected to a 9V battery to the Power input (P2). The board will execute the VI at start-up. IF you do not have access to a battery, you can simply reconnect the USB Cable to provide power to the board.
- You can return the flash memory to its default position by choosing Factory Default Post (Power-On Self-Test) option in the Download to Flash Memory Dialog box.
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).