Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Tutorial
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Related Links - Developer Zone

Related Links - Products and Services

Modifying How TestStand Executes Sequences (Changing the Default TestStand Process Model)

1 ratings | 1.00 out of 5
Print
TestStand performs sequence execution based on a default process model sequence file called TestStandModel.seq which can be found at \TestStand\Components\NI\Models\TestStandModel.

To modify how TestStand executes sequences:
  1. Open TestStandModel.seq from the location mentioned above.
  2. Make your desired changes to the sequence file.
  3. Save the sequence file in TestStand\Components\User\Models.
  4. Use the Configure>>StationsOptions>>Model dialog box to specify your newly created sequence file as the Station process model sequence file, as shown below.
  5. Click Ok to return to the sequence editor. When you run your sequence files TestStand will execute the sequence execution according to your customized process model.


1 ratings | 1.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).