Modular Instruments Drivers for Linux
PrintDigital Multimeters
NI-DMM 2.5 for Linux
Dynamic Signal Analyzers
NI-DAQmx 8.0 for Linux
High-speed Digitizers
NI-Scope 2.9 for Linux
Signal Generators
NI-FGEN 2.4.1 for Linux
Switches
NI-DAQmx 8.0 for Linux
Development Environments
These drivers support two application development environments (ADEs):
- LabVIEW 8.0 and later versions
- C and C++ through the use of the gcc compiler
Note: These drivers do not support other ADEs, such as
the LabVIEW Real-Time Module, LabWindows/CVI, and Measurement Studio.
Also, some features available through LabVIEW for Windows are not
available on Linux.
Linux Environments
These drivers are supported for Intel x86 32-bit systems only.
The installers have been tested on the following Linux distributions:
- Mandrakelinux 10.1 Official
- SUSE LINUX Professional 9.2, 9.3
- Mandriva Linux 2006
- Red Hat Enterprise Linux WS 3
Note: For more information about supported Linux versions and distributions supported by National Instruments, refer to ni.com/linux.
For more information regarding driver compatibility please refer to README.txt in the driver page
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).