NI-SCOPE Measurements Library for High-Speed Digitizers/Oscilloscopes
PrintWaveform measurements offer you another method for fetching data from a National Instruments high-speed digitizer/oscilloscope, but instead of time-domain waveforms, the results are scalar or array measurements. Scalar measurements refer to calculations such as rise time and frequency, which take the time-domain data and produce a single value, while array measurements transform the time-domain data into a new waveform, such as an FFT amplitude spectrum.
Related Links:
Scalar Measurements with the NI-SCOPE Measurements Library for High-Speed Digitizers/Oscilloscopes
Array Measurements with the NI-SCOPE Measurements Library for High-Speed Digitizers/Oscilloscopes
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).