Example Configuration: 4x128 2-wire USB Switch Matrix
PrintThe 4x128 2-wire USB switch matrix minimizes out-of-the-box setup time, requiring you only to insert the desired SCXI switch modules and connect to a USB port to start switching. This system is constructed using just two slots of a 4-slot USB Switch chassis thereby allowing channel-count expansion to create a 4x256 or 8x128 2-wire matrix. Matrix expansion is done using an expansion cable which is also included in the system. To simplify programming and of the switch matrix, use NI Switch Executive, a switch management and routing application that simplifies switch system configuration and maximizes code reuse, ultimately lowering cost to test.
Pricing and Ordering Information
| Part Number | Description | Quantity |
| 778570-01 | SCXI-1000 w/ USB HVAB Option, 120V (4-Slot USB Switch Mainframe) | 1 |
| 776572-29 | SCXI-1129 High-Density, Multiconfiguration Matrix | 2 |
| 777687-34 | SCXI-1334, Terminal Block for SCXI-1129 as 4X64 Matrix | 2 |
| 185440-0R4 | Cable Assy, Kit, Matrix Expansion Cables, High Voltage (0.4m) |
|
1
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).