Print
PDFOverview
These tutorials show how to use LabVIEW for the analysis and design of automatic control systems. They cover the basics of LabVIEW Control Design Toolkit and Simulation Module, the most common classical control design techniques (PID, root locus, and frequency response), as well as some modern (state-space) control design and digital control.
To begin, select a topic below, or click here.
These tutorials are based on the Control Tutorials developed by Professor Dawn Tilbury of the Mechanical Engineering department at the University of Michigan and Professor Bill Messner of the Department of Mechanical Engineering at Carnegie Mellon University and were developed with their permission.
Resources
Introduction to Control Design and Simulation in 3 Hours using LabVIEW
This 3 hour short course is designed as an instructor-led and self study introduction to the control design process. This includes modeling, designing, simulating, and deploying a controller using LabVIEW, Control Design Toolkit and Simulation Module. The course includes a presentation, manual, exercises, and solutions. Visit the website...
How Can I Learn LabVIEW?
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).