Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Basic Spectral Measurement

0 ratings | 0.00 out of 5
Print

Overview

Signal Processing Resource Center » LabVIEW Signal Processing Shipping Examples » Basic spectral Measurement

This example shows how to take a spectral measurement on a simulated signal. The spectral measurement is an Peak FFT of the simulated signal. This example uses the following Express VIs: Simulate Signal and Spectral Measurements.

Discover how to Analyze Data with LabVIEW

Learn about using textual algorithms for signal processing with NI LabVIEW MathScript

 

Front Panel

This example requires the Full or Professional version of LabVIEW and is included as a shipping example. Download the LabVIEW Evaluation to try this example on your computer, or visit the LabVIEW Online Evaluation to use LabVIEW without downloading any software. To run this example, open LabVIEW and navigate to Help » Find Examples » Analyzing and Processing Signals » FFT and Frequency Analysis

 



Related Links

 

Downloads

basic_spec_meas.vi

0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).