Experiment 4: Using the Emona DATEx to model equations
PrintOverview
This experiment will introduce you to modelling equations by using the Emona DATEx to implement two relatively simple equations.
Click on the PDF in the Downloads section of this document to see the content of this experiment, which is a sample from the Emona DATEx Lab Manual, Volume 1, by Barry Duncan, which is included with the Emona DATEx.
Additional Resources
- Emona ETT-202 DATEx for NI ELVIS Product Page
- Emona DATEx Overview Slides
- Emona ETT-202 DATEx for NI ELVIS Resource Page
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).