Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

LabVIEW Embedded Module for ADI Blackfin Processors - Evaluation Options

0 ratings | 0.00 out of 5
Print

Overview

The Analog Devices EZ-KIT evaluation boards provide a cost effective method for initial evaluation of the LabVIEW Embedded Module for Blackfin Processors. With these kits you can learn more about developing with ADI's processors and LabVIEW software tools.

Table of Contents

  1. Comparison Table
  2. ADSP-BF537 EZ-KIT Lite®
  3. ADSP-BF548 EZ-KIT Lite®
  4. ADSP-BF527 EZ-KIT Lite®
  5. ADSP-BF561 EZ-KIT Lite®

Comparison Table

ADSP-BF537 EZ-KIT Lite®

bf537.png

Features

  • Processor and Memory
    • ADSP-BF537 Blackfin Processor
      • Single core - 600MHz max
    • 64 MB (32M x 16) SDRAM, 4 MB (2 M x 16) FLASH memory
  • Peripherals
    • SMSC LAN83C185 10/100 PHY with RJ45 Connector
    • RS-232 UART line driver/receiver
    • 2 channels analog input (AC coupled)
      • AD1871 96 KHz stereo ADC
    • 2 channels analog output (AC coupled)
      • AD1854 96 KHz stereo DAC

How to Evaluate

 

Step 1 – Order the evaluation kit from National Instruments

 

ADSP-BF548 EZ-KIT Lite®

548.jpg

Features

  • Processor and Memory
    • ADSP-BF548 Processor
      • Single core - 600MHz max
    • SDRAM: 64 MB (8M x 16)
    • BURST Flash: 32 MB (16M x 16 )
    • NAND Flash: 2 Gb
    • SPI Flash: 16 Mbit
    • Hard Drive: Toshiba MK4032GAX 40GB 2.5” drive
  • Peripherals
    • TFT LCD Display with Touch Screen
    • SHARP LQ043T1DG01, 480 X 272, 4.3 inch Touch Screen LCD
    •  Ethernet: SMSC MAC/PHY LAN9218
    • Keypad: ACT Components, ACT-07-30008-000-R 4x4 Keypad assembly
    • Thumbwheel: CTS Corp 290UAB0R201B2, Rotary Encoder
    • UART: ADM3202 RS-232 line driver/receiver; DB9 female connector
    • 6 general purpose LEDs
    • 4 push buttons w/ debounce logic

How to Evaluate

 

Step 1 – Order the evaluation kit from Analog Devices

Step 2 – Download and install the evaluation software

 

ADSP-BF527 EZ-KIT Lite®

548.jpg

Features

  • Processor and Memory
    • ADSP-BF527 Processor:
      • Single core - 600MHz
    • SDRAM: 64 MB (32M x 16)
    • FLASH: 4 MB (2M x 16 )
    • NAND FLASH: 4 Gb
    • SPI FLASH: 16 Mb
  • Peripherals
    •  LCD Display
    • Varitronix - Landscape QVGA, 8 bit serial 320x240, Touch Screen
    • Ethernet PHY: SMSC (RMII); LAN8700
    • Thumbwheel: CTS Corp, Rotary Encoder, 2 Bit Binary, CT2999-ND
    • Keypad
    • RS-232 line driver/receiver
    • 3 general purpose LEDs
    • 3 push buttons w/ debounce logic

How to Evaluate

 

Step 1 – Order the evaluation kit from Analog Devices

Step 2 – Download and install the evaluation software

 

ADSP-BF561 EZ-KIT Lite®

548.jpg

Features

  • Processor and Memory
    • ADSP-BF561 Blackfin Processor
      • Dual core - 600MHz max (each)
    • 64 MB (16 M x 16-bit x 2) SDRAM
    • 8 MB (4 M x 16-bit) FLASH memory
  • Peripherals
    • AD1836 multichannel 96 kHz audio codec
    • 4 push buttons w/ debounce logic

How to Evaluate

 

Step 1 – Order the evaluation kit from Analog Devices

Step 2 – Download and install the evaluation software

 

0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).