LabVIEW 8.6.1 Control Design and Simulation Module Bug Fixes
PrintOverview
The following items are the IDs and titles of a subset of issues fixed between the LabVIEW 8.6 Control Design and Simulation Module and the LabVIEW 8.6.1 Control Design and Simulation Module. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the LabVIEW Control Design and Simulation Module.
Bug Fixes
The following items are the IDs and titles of fixed issues from the LabVIEW 8.6 Control Design and Simulation Module.
| Bug ID | Fixed Issue |
|---|---|
| 36749 | Add array elements in case of single array input when converting to Summation block |
| 117820 | Discrete Models should be loadable in Discrete TF Configuration Dialog |
| 124353 | LUT2D behaves incorrectly |
| 125485 | Rlocus, Margin and any other path files are not working on Mac |
| 126195 | Query Subsystem.vi is not runnable in RT VxWorks |
| 127230 | Lookup Table 2D in LabVIEW 8.6 - Reversed X and Y axis |
| 127433 | Various "config window" issues in the ZPK block |
| 127536 | Seed in the Signal Generator in Random Mode Only Changes Every Second |
| 128265 | Broken Run Arrow with no Errors in Error List |
| 131345 | "Set Parameter Value" Vector does not work |
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).