GPIB-RS232/485/422 Examples
PrintOverview
GPIB Serial Converter examples for C, D, S, and G modes for the C programming language.
This set of four examples for the GPIB-RS232/485/422 demonstrate use of the converter in each of the four modes of operation: C, D, S, and G. Each example shows how to query a serial or GPIB instrument for identification information using the *IDN? command and then subsequently read back a response from the instrument.
The examples are dependent on visa.h and visa32.lib and thus require NI-VISA to be installed.
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).