Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Tutorial
NI Supported: Yes
Publish Date: Sep 6, 2006

LabVIEW DSP FAQ

0 ratings | 0.00 out of 5
Print

Overview

Frequently Asked Questions about the LabVIEW DSP Module

Table of Contents

  1. What DSP targets are supported by the LabVIEW DSP Module?
  2. I have a DSP board that has the same DSP chip that the TI C6711 has. Can I use the LabVIEW DSP Module?
  3. What do I need to know to make sure the LabVIEW DSP Module works with my TI DSK?
  4. Where can I find more information about the LabVIEW DSP Module?
  5. Where can I find more information about the TI DSKs?

What DSP targets are supported by the LabVIEW DSP Module?

The LabVIEW DSP module can only support the following THREE DSP targets.
· NI SPEEDY-33
· TI TMS320C6711 DSK
· TI TMS320C6713 DSK

I have a DSP board that has the same DSP chip that the TI C6711 has. Can I use the LabVIEW DSP Module?


No. The LabVIEW DSP Module has been optimized to work only with the three hardware targets – NI SPEEDY-33, TI TMS320C6711 DSK and TI TMS320C6713 DSK. Any other board, even if it uses the same DSP chip cannot be targeted with the LabVIEW DSP Module

What do I need to know to make sure the LabVIEW DSP Module works with my TI DSK?


Check to make sure that your TI DSK is either the Texas Instruments TMS320C6711 DSK or the TMS320C6713 DSK. If it is any DSK other than these two, the LabVIEW DSP Module cannot target the DSK.

Where can I find more information about the LabVIEW DSP Module?


You can find more information about the LabVIEW DSP Module at www.ni.com/dsp

Where can I find more information about the TI DSKs?


You can find more information on the TI C6711 and TI C6713 DSKs by following the links below:

TI C6711 DSK: http://focus.ti.com/docs/toolsw/folders/print/tmds320006711.html
TI C6713 DSK: http://focus.ti.com/docs/toolsw/folders/print/tmdsdsk6713.html
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).