NI-DAQmx: Continuous Acquisition Thermocouple Samples - Software Timed in .NET
Specify the appropriate Auto Zero Mode. See your SCXI device's hardware manual to find out if your device supports this attribute. E-Series devices do not support this attribute.
Hardware: CompactDAQ, Multifunction DAQ, Portable DAQ, SCC, SCXI

Rosette Strain Gauge Calculation VI
This VI calculates principal strains and maximum shear strains in a 2D plane. It also calculates the directions of these strains. This VI is designed to be used as a subVI for a project involving the acquisition of strain data from a Rosette pattern of gauges.
Hardware: CompactDAQ, CompactRIO, Multifunction DAQ, PXI/CompactPCI, SCXI

Continuous Acquire & Graph Voltage - Write Data to Spreadsheet File (CSV)
It is often desired to be able to continually acquire data and then write this data to a spreadsheet file that can later be viewed in Microsoft Excel or Notepad. LabVIEW provides a host of ways to this. “Write to Measurement File.vi” and “Write to Spreadsheet File.
Software: LabVIEW Base Development System, LabVIEW Full Development System, LabVIEW Professional Development System
Hardware: CompactDAQ, Multifunction DAQ, PXI/CompactPCI, SCC, SCXI

使用DAQmx完成测力计应用项目
硬件组: PXI/CompactPCI, 多功能数据采集设备(MIO), SCXI 硬件类型: SCXI-1102, SCXI-1124, PCI-6251, SCXI-1126, SCXI-1520 驱动软件: NI-DAQmx 7.

Improved Strain Shunt Calibration Examples
DESCRIPTION: These LabVIEW Examples are based off the Shunt Calibration LabVIEW shipping examples, but they add the ability to individually select which channel(s) in a task to perform a shunt calibration.
Software: LabVIEW Base Development System
Hardware: Multifunction DAQ, SCXI

Custom RTD Measurement
Document Type: Customer Submitted Example Contributor Name: R.karthikeyan Contributor Company: AutoTEC Systems Pvt Ltd., NI Supported: No Publish Date: Sep 6, 2006
Software: Measurement Studio Professional Edition
Hardware: SCXI

NI-DAQmx: Continuously Acquire Thermocouple Samples - Hardware Timed in LabVIEW
I. Description: This example demonstrates how to make continuous, hardware-timed temperature measurement using a thermocouple. II. Instructions for Running: 1. Specify the Physical Channel where you have connected the thermocouple. 2.
Software: LabVIEW Base Development System, LabVIEW Full Development System, LabVIEW Professional Development System
Hardware: Multifunction DAQ, SCXI

Manually Scaling Thermocouple Measurements in DAQmx
This example program acquires thermocouple data from an SCXI-1102 (or any SCXI, SCC, or DAQ device that has a built-in CJC), averages it, linearizes it, and graphs it on a strip chart.
Software: LabVIEW Base Development System
Hardware: SCXI

Configuring the SCXI 1127/1128 as a 32x1 Matrix
The SCXI 1127/1128 can be configured as a 32x1 Matrix using the SCXI 1331 terminal block. This example demonstrates how to configure the switch in this mode. Steps to Configure: 1) Configure switch using INDEP descriptor to set switch to independent mode.
Software: LabVIEW Base Development System
Hardware: Switches

DMM and Switches Synchronous and Handshaking Scanning Examples
These two examples show how to program a switch and a DMM for synchronous scanning operations (DMM Switch Synchronous Scanning.vi) and handshaking operations (DMM Switch Handshaking.vi). To open these two examples, NI-SWITCH 2.1 and NI-DMM 2.2 need to be installed.
Software: LabVIEW Full Development System
Hardware: Digital Multimeters, Switches