Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
What is Developer Zone?
You have browsed by [remove all]

Content Type
: Example [remove]
Product
: Modular Instruments / High-Speed Digitizers [remove]

Narrow Results by

Product
Devices (54)
Software (108)
Development Topic
Programming Fundamentals (48)
Signal Processing & Analysis (32)
Measurement & Instrumentation (53)
Control (11)
Language
English (118)
Industry
Electronics (3)
Telecommunications (4)
University/Education (10)
Manufacturing (1)
RF/Communications (11)
Technology
Microsoft .NET (9)
RF (8)
SPICE Simulation (1)
Wireless (1)
Application Type
Frequency (12)
Power (10)
Power and Energy (1)
Simulation (11)
Sound and Audio (4)
Time (2)
Document Type
Community Contributed (1)
NI Supported (114)
NI UNSupported (3)

1-10 of 118 results
  rss
Sort items by:

NI-Scope Phase Noise VI
This example performs phase noise density measurements on a signal acquired using an NI-SCOPE digitizer. Phase noise density is typically specified in terms of power at certain offsets from the carrier frequency.
Hardware: Digitizers/Oscilloscopes

Adjacent Channel Power for PXI-5142
Performs Adjacent Channel Power Measurements on PXI-5142. This program is a shipping example VI included with the Spectral Measurements Toolkit for NI LabVIEW. This Virtual Instrument is designed to work with Digitizer/Oscilloscope hardware from National Instruments.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

Adjacent Channel Power for niScope
This example acquires data from the NI-SCOPE digitizer, computes the spectrum, and calculates the power in a center and two adjacent channels. The channels are defined in the channel specification control. This VI acquires data repeatedly until the STOP Boolean is pressed.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

Configured Spectrum for niScope
This example acquires data from the NI-SCOPE digitizer, computes the spectrum defined in the spectrum settings cluster, and displays the computed spectrum. You can choose to display either time or frequency information. This VI acquires data repeatedly until the STOP Boolean is pressed.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

Magnitude and Phase Spectrum for niScope
This example acquires data from the NI-SCOPE digitizer, computes the spectrum defined in the spectrum settings cluster, and displays the spectrum with magnitude and phase information. The phase control determines whether the phase is displayed as wrapped or unwrapped.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

MT NI-Scope Demodulate AM
MT niScope Demodulate AM Example shows how to demodulate an AM signal using a High-Speed Digitizer. This example shows how to configure the Digitizer for modulation-domain measurements. It then shows how to acquire time-domain data.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

Multiple Channel Differential Scope Acquistion
Example program of how to take differential measurements with our high channel count high speed digitzer scope cards. **The accompanying code represents a very specific use case for NI products. For more general examples, please refer to ni.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

Modulation Toolkit niScope IQ
This example demonstrates I-Q acquisition using NI PXI-562x high-speed digitizers. The example illustrates hardware configuration in terms of modulation-domain parameters. Depending on your settings, this example acquires either intermediate frequency (IF) or I-Q data directly from the digitizer.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

IF Spectrum Analyzer for the NI-5142 (OSP Based)
THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).
Software: LabVIEW Professional Development System
Hardware: Digitizers/Oscilloscopes

MT Demodulate AM 5142
This example demonstrates how to demodulate an AM signal using the NI PXI-5142 High Speed Digitizer with Onboard Signal Processing (OSP). The OSP on the digitizer is configured to carry out Digital Downconversion (DDC) on the input signal and return the complex (IQ) baseband.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

1-10 of 118 results
  rss