Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
What is Developer Zone?
You have browsed by [remove all]

Content Type
: Example [remove]
Product
: Data Acquisition / Digital I/O [remove]

Narrow Results by

Product
High-Speed Devices (89)
Digital I/O Real-Time Devices (26)
Industrial Devices (8)
R Series Devices (16)
Static Devices (8)
Legacy Devices (1)
Software (1554)
Development Topic
Programming Fundamentals (475)
Signal Processing & Analysis (106)
Measurement & Instrumentation (1013)
Control (93)
Simulation & Design (1)
Language
English (1516)
Chinese (Simplified) (2)
Industry
Aerospace/Avionics (64)
ATE/Instrumentation (10)
Automotive (70)
Basic Materials - Steel/ Lumber/ Construction (4)
Life Science (22)
Consumer Goods (5)
Electromechanics/ Electrotechnics (9)
Electronics (64)
Energy/Power (14)
Food/Beverage (5)
More... 
Technology
ActiveX (1)
Embedded Devices (1)
FPGA (18)
GPS (4)
HMI (2)
Microsoft .NET (13)
Multicore (1)
RF (14)
SPICE Simulation (2)
USB (6)
More... 
Application Type
Acceleration (8)
Angular Velocity (1)
Calibration (1)
Control (11)
Current (1)
Frequency (33)
Position (2)
Power (18)
Power and Energy (7)
Rotation (1)
More... 
Document Type
Community Contributed (66)
NI Supported (1479)
NI UNSupported (14)

1-10 of 1559 results
  rss
Sort items by:

Lock in Amplifier on LabVIEW FPGA
Lock in Amplifier on LabVIEW FPGA is an NI Developer Zone Community Example. {size:14px} Lock-in Amplifier is an instrument that can detect the amplitude and phase of sinusoidal signal with known frequency in extremely low signal to noise
Software: LabVIEW Professional Development System

Streaming Data from FPGA to cRIO to Windows Example
This is an optimized example for streaming data from FPGA to cRIO to Windows. Note: This example is optimized for throughput and CPU Usage. Therefore, some determinism is lost. The cases where this is true is documented below.
Software: LabVIEW Professional Development System
Hardware: CompactRIO

Multiply Accumulate (MAC) optimized for DSP48E slice using HDL node
A Multiply Accumulate (MAC) operation is a common type of operation in FPGA that can be carried out in normal logic or optimized with the Virtex-5 FPGAs using a special slice called the DSP48E.
Software: LabVIEW Professional Development System
Hardware: Reconfigurable I/O

JTAG communication
JTAG communication is an NI Developer Zone Community Example. All, I have a motor control board with me with Altera FPGA on it. Currently I program the FPGA with firmware using RS485 communication. However this is very slow & I need to us
Software: LabVIEW Full Development System

Multiple PXI Device Synchronization and Multithreading Using VB.NET
This example demonstrates synchronizing multiple National Instruments devices in a PXI chassis using Visual Basic.NET and the appropriate NI drivers for the .NET Framework 2.0. It also demonstrates how to set callback functions for certain devices to be run from their own threads.
Hardware: Digital I/O, GPIB, High-Speed Digital I/O, Multifunction DAQ, PXI/CompactPCI, Signal Generators

NI ELVIS II Photogate Timing Lab
This lab introduces students to the NI ELVIS II Design and Prototyping Platform and the Vernier plug-in sensors. A Vernier Photogate sensor is connected to the protoboard and measured through the driver software. This example is part of "Teaching Measurements and Instrumentation with NI ELVIS II."
Software: LabVIEW Full Development System

NI ELVIS II Photogate Count Events Lab
This lab introduces students to the NI ELVIS II Design and Prototyping Platform and the Vernier plug-in sensors. A Vernier Photogate Sensor is connected to the protoboard and measured through the driver software. This example is part of "Teaching Measurements and Instrumentation with NI ELVIS II."
Software: LabVIEW Full Development System

NI ELVIS II Drop Counter Lab
This lab introduces students to the NI ELVIS II Design and Prototyping Platform and the Vernier plug-in sensors. A Vernier Drop Counter sensor is connected to the protoboard and measured through the driver software. This example is part of "Teaching Measurements and Instrumentation with NI ELVIS II.
Software: LabVIEW Full Development System

NI ELVIS II Detect Position Lab
This lab introduces students to the NI ELVIS II Design and Prototyping Platform and the Vernier plug-in sensors. A Vernier Motion Detector sensor is connected to the protoboard and measured through the driver software.
Software: LabVIEW Full Development System

NI ELVIS II Detect Velocity Lab
This lab introduces students to the NI ELVIS II Design and Prototyping Platform and the Vernier plug-in sensors. A Vernier Motion Detector sensor is connected to the protoboard and measured through the driver software.
Software: LabVIEW Full Development System

1-10 of 1559 results
  rss