Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
What is Developer Zone?
You have browsed by [remove all]

Content Type
: Example [remove]
Product
: Software / LabWindows/CVI [remove]

Narrow Results by

Product
Development Systems (663)
Toolkits and Modules (32)
Development Topic
Programming Fundamentals (445)
Signal Processing & Analysis (54)
Measurement & Instrumentation (203)
Control (21)
Language
English (686)
Industry
Aerospace/Avionics (1)
ATE/Instrumentation (2)
Automotive (3)
Electronics (5)
Government/Defense (2)
Machines/Mechanics (1)
Research (2)
Semiconductor (1)
Telecommunications (4)
University/Education (6)
More... 
Technology
ActiveX (5)
Microsoft .NET (1)
Multicore (1)
RF (7)
Wireless (3)
Application Type
Frequency (10)
Power (9)
Simulation (7)
Sound and Audio (4)
Temperature (1)
Time (2)
Document Type
Community Contributed (22)
NI Supported (670)

1-10 of 692 results
  rss
Sort items by:

RF Record and Playback Test Panel
This example is not intended to be used as reference for an application. If you plan to do this, we recommend using the RF Record and Playback Application Reference also linked below. Front Panel
Software: LabVIEW Full Development System
Hardware: RF

RF Record and Playback Reference Application
The file includes a User Interface (UI) where all the components are called in the correct order. To visualize the components interaction, Figure 1 displays the hierarchy of the VI.
Software: LabVIEW Full Development System
Hardware: RF

Extension of the Labwindows/CVI - ArbitraryWaveformStreaming example from NI
Extension of the Labwindows/CVI - ArbitraryWaveformStreaming example from NI is an NI Developer Zone Community Example. Hello All, There is a pretty good example of how to use streaming to the AWG listed under CVI but I found I needed a
Software: LabWindows/CVI Full Development System

Remote Keyless Entry Reference Architecture
This reference architecture is a set of VIs that supports modulation and demodulation for this type of application, to control frame content, and perform basics spectral measurements.
Software: LabVIEW Full Development System

Adjacent Channel Power for PXI-5142
Performs Adjacent Channel Power Measurements on PXI-5142. This program is a shipping example VI included with the Spectral Measurements Toolkit for NI LabVIEW. This Virtual Instrument is designed to work with Digitizer/Oscilloscope hardware from National Instruments.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

Adjacent Channel Power for niScope
This example acquires data from the NI-SCOPE digitizer, computes the spectrum, and calculates the power in a center and two adjacent channels. The channels are defined in the channel specification control. This VI acquires data repeatedly until the STOP Boolean is pressed.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

Configured Spectrum for niScope
This example acquires data from the NI-SCOPE digitizer, computes the spectrum defined in the spectrum settings cluster, and displays the computed spectrum. You can choose to display either time or frequency information. This VI acquires data repeatedly until the STOP Boolean is pressed.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

Magnitude and Phase Spectrum for niScope
This example acquires data from the NI-SCOPE digitizer, computes the spectrum defined in the spectrum settings cluster, and displays the spectrum with magnitude and phase information. The phase control determines whether the phase is displayed as wrapped or unwrapped.
Software: LabVIEW Full Development System
Hardware: Digitizers/Oscilloscopes

IQ Spectrum for NI RF Signal Analyzers
This example uses NI-RFSA driver to acquire IQ data. Once the IQ data is acquired, the Spectral Measurements Toolkit VIs are used to perform Zoom Power Spectrum Measurements. This program is a shipping example VI included with the Spectral Measurements Toolkit for NI LabVIEW.
Software: LabVIEW Full Development System
Hardware: RF

Peak Search for NI RF Signal Analyzers
This example uses NI-RFSA driver to acquire Power Spectrum and perform Peak Search Measurements. This program is a shipping example VI included with the Spectral Measurements Toolkit for NI LabVIEW.
Software: LabVIEW Full Development System
Hardware: RF

1-10 of 692 results
  rss