Joystick Inputs with DAQ Card Outputs. This example takes inputs from a joystick, scales the data and outputs to a DAQ device. This input only takes the X-axis data but can be expanded to use X,Y, and Z axes.... Software: LabVIEW Professional Development System Hardware: Multifunction DAQ
Approximate Frequency Measurement with USB-600X Simple Edge Counter This application written in LabVIEW 7.1 shows how to use the simple event counter functionality of the USB-600X devices and the computer's timer to calculate an approximate average...... Software: LabVIEW Base Development System Hardware: Multifunction DAQ
Continuous Software Timed Analog Output for the USB-6008 and USB-6009 This program demonstrates how to perform continuous analog output tasks on the USB-6008 / 6009 and also incorporates the theory of operation that is associated with software timed ...... Software: LabVIEW Base Development System, LabVIEW Full Development System, LabVIEW Professional Development System Hardware: Multifunction DAQ
NI-DAQmx Base: Read Digital Line This example shows how to dynamically read a single digital line with the NI-DAQmx Base commands. It accomplishes this by parsing out the desired line from the data read on the dig...... Software: LabVIEW Base Development System, LabVIEW Full Development System, LabVIEW Professional Development System Hardware: Multifunction DAQ
NI-DAQmx Base: Write to Digital Line This example shows how to write digital data to a single digital line on a specified port with NI-DAQmx Base commands. Instructions: 1. Select the digital port and line on the DAQ ...... Software: LabVIEW Base Development System, LabVIEW Full Development System, LabVIEW Professional Development System Hardware: Multifunction DAQ
Using .NET and DAQmx to Acquire Resistance Values This example demonstrates how to use the DAQmx.NET Library and Measurement Studio to acquire resistance data.... Software: Measurement Studio .NET Support Hardware: Multifunction DAQ
Configuring the Output Drive Type of NI USB-600x Devices I. Description: This example demonstrates how to configure the Output Drive Type property of a NI USB-600x device. II. Instructions for Running: 1. Select the digital lines on the ...... Software: LabWindows/CVI Full Development System, LabVIEW Professional Development System Hardware: Multifunction DAQ
NI USB AutoLauncher The NI USB AutoLauncher is an example application designed to demonstrate the exciting new NI USB hardware products. This demo currently supports all released NI USB devices that a...... Hardware: Multifunction DAQ, SCXI
Serial Number of USB Devices with NI-DAQmx Base This program will return the serial number of any USB Device supported by NI-DAQmx Base.... Software: LabVIEW Full Development System Hardware: Multifunction DAQ
