FRC Robot Modes / States Explained FRC Robot Modes / States Explained is a Tutorial - There are multiple different things that govern the FRC robot state. Knowing how they are used in programming and displayed on the driver station are pivotal to using and debugging. A robot can: Be d... Software: LabVIEW Base Development System Hardware: Motion Control
National Instruments Product Compatibility for Microsoft Windows Vista The following document outlines National Instruments Product Support for Windows Vista, The table lists the minimum version required to operate on the specific operating system: XP......
S-Curve Acceleration and Deceleration S-curve acceleration and deceleration refers to the shape of the velocity profile of a given move. Without using s-curve acceleration when you load an acceleration, velocity, and p......
Overview of the FlexMotion architecture This document contains a brief overview of FlexMotion, and describes its different components....
Recording Points and Playing Them Back Description The 2-Axis Point Recorder example is a FlexMotion example using the encoders of the specified X and Y axes to record a specified number of positions with a specified ti......
Using the 1-D Interactive Environment to test motor functionality (7334, 7344, 6C) Overview of the 1-D Interactive Panel. The Motion Controller Interactive Environment helps you test and debug your system using your current initialization settings. Click the plus......
Find Reference Settings for Motion Controllers Note: The instructions contained in this document are for NI-Motion 6. x or earlier. For instructions for NI-Motion 7.0 or later refer to Measurement & Automation Explorer Help......
Initializing Motion Controllers Before running a motion control program, you must initialize the motion controller. One way to initialize the controller is to use the special utility that is included with each ve......
Understanding Variable Arithmetic in Onboard Programming This section contains a summary of the available math functions on general-purpose variables. Variables can be loaded, added, multiplied, AND-ed, and so on before being used as dat......
Trajectory Settings for Motion Controllers Note: The instructions contained in this document are for NI-Motion 6. x or earlier. For instructions for NI-Motion 7.0 or later refer to Measurement & Automation Explorer Help......
