Measuring Strain with Strain Gages
This tutorial is part of the National Instruments Measurement Fundamentals series. Each tutorial in this series will teach you a specific topic of common measurement applications b......

Considerations When Switching Low Capacitance Measurements
An automated test system (ATS) developed to measure capacitances in the pF range requires planning to address several capacitance measurement challenges and to choose a suitable sy......

An Introduction to New Technologies for Structural Testing and Health Monitoring
Structural health monitoring and testing systems are critical to the maintenance and safety of our aging infrastructure. Explore new hardware and software technologies that enable a new generation of affordable and effective structural testing and monitoring systems....
Media Type: Webcast
Duration: 12 minute(s)

NI-DAQmx: Find DAQ Device Resource Programmatically
This VI takes a device type input (ex. PCI-6251, USB-6008, etc.) and returns the resource name specified in Measurement and Automation...
Software: LabVIEW Professional Development System
Hardware: CompactDAQ, Digital I/O, Multifunction DAQ, Portable DAQ, SCXI

Reed Relay Protection
The life expectancy of reed relay (like those found on the NI PXI-2530 and NI SCXI-1130 multiplexers or the NI PXI-2532 matrix) can be extremely long compared to an armature relay.......

NI-DAQmx: Single Thermocouple Sample in .NET
This example demonstrates how to acquire one temperature reading from one or more thermocouples....
Hardware: Multifunction DAQ, SCXI

Connecting LabVIEW with INRIA Scilab
Connecting LabVIEW with INRIA Scilab is a EXAMPLE - REQUIREMENTS: Application Software: LabVIEW Full Development System 8.0 Driver Software: NI-DAQmx 8.7.2 Hardware Family: CompactDAQ, CompactRIO, Multifunction DAQ (MIO), PXI/CompactPCI, S...
Software: LabVIEW Full Development System
Hardware: CompactDAQ, CompactRIO, Multifunction DAQ, PXI/CompactPCI, SCC, SCXI

Strain Gauge Configuration Types
This document discusses how to arrange, connect, and scale signals from bridge-based sensors, especially strain gauges....

Report: Diagramm Vorbelegung Farbe Skalenbeschriftung 11.0 und 10.2
Report: Diagramm Vorbelegung Farbe Skalenbeschriftung 11.0 und 10.2 is a Tutorial - Hallo, ich möchte sowohl in der Version Diadem 10.2 als auch in 11.0 die Farbe der Skalenbeschriftung im Report dauerhaft vorbelegen ohne ein Masterlayout zu benutzen....
Software: LabVIEW Professional Development System
Hardware: CompactDAQ, CompactRIO, Multifunction DAQ, PXI/CompactPCI, SCC, SCXI

Identify and Characterize Damaging PCB Assembly and Test Processes Using Strain Gage Testing
Stress-induced solder joint failure is one of the most common modes of printed circuit board assembly (PCBA) failures. Today, this problem is further exasperated with the introduct......