Serial as I/O Interface for Instrument Driver

LabWindows/CVI 2017 Help

Edition Date: May 2017

Part Number: 370051AG-01

»View Product Info

DOWNLOAD (Windows Only)
LabWindows/CVI 2010 Help
LabWindows/CVI 2012 Help
LabWindows/CVI 2013 Help
LabWindows/CVI 2015 Help
LabWindows/CVI 2017 Help

If you select Serial as the I/O interface, you must complete the following steps in the wizard to create an instrument driver.

  1. Select an instrument driver
  2. Specify general information
  3. Specify general command strings
  4. Select standard operations

    Depending on the standard operations you select, you can specify the following options:
  5. Configure the serial port
  6. Run tests on the instrument

WAS THIS ARTICLE HELPFUL?

Not Helpful