October 2008

370051M-01

Download Help (Windows Only) |

This help topic contains error codes that the Advanced Analysis Library
functions return. If an error condition occurs during a call to any of the functions
in the LabWindows/CVI Advanced Analysis Library, the return value **status** contains the
returned error code. This code is a value that specifies the type of error that
occurred. Call GetAnalysisErrorString to convert the error number an Analysis Library function returns into a meaningful error message. The following table, *Advanced Analysis Library Error Codes, Sorted Alphabetically*, lists the error codes alphabetically by symbolic name. For your convenience,
the Advanced Analysis Library Error Codes, Sorted Numerically table lists the error codes in numeric order.

Symbolic Name | Code | Error Message |
---|---|---|

AccuracyAnlysWarn | 20006 | Warning: The computation result might be inaccurate. |

ArraySizeAnlysErr | -20008 | The input arrays do not contain the correct number of data values for this function. |

ArraySizeAnlysWarn | 20010 | Warning: The sizes of the input arrays do not meet the specified conditions. |

AttenGTRippleAnlysErr | -20028 | The attenuation value must be greater than the ripple amplitude. |

AttenGTZeroAnlysErr | -20025 | The attenuation must be > 0. |

BalanceAnlysErr | -20047 | The data is unbalanced. All cells must contain the same number of observations. |

BandSpecAnlysErr | -20023 | The following conditions must be met: 0 < f_low ≤ f_high ≤ fs/2. |

BaseGETopAnlysErr | -20101 | Parameter must meet the condition Top > Base. |

BetaFuncAnlysErr | -20057 | The parameter to the beta function should be 0 < p < 1. |

CategoryAnlysErr | -20055 | The number of categories or samples must be greater than one. |

CloseEgnValAnlysErr | -20073 | The eigenvalues cannot be reordered because some of them are too close. |

ColumnAnlysErr | -20051 | All values in the first column of X matrix must be one. |

CyclesAnlysErr | -20012 | The number of cycles must be > 0 and ≤ the number of samples. |

DataAnlysErr | -20045 | The total number of data points must be equal to the product of levels/each factor * observations/cell. |

DecFactAnlysErr | -20022 | The decimating factor must meet: 0 < decimating factor ≤ samples. |

DelayWidthAnlysErr | -20014 | The following conditions must be met: 0 ≤ (delay + width) < samples. |

DimensionAnlysErr | -20058 | Invalid number of dimensions or dependent variables. |

DistinctAnlysErr | -20049 | The x-values must be distinct. |

DivByZeroAnlysErr | -20060 | Divide by zero error. |

DtGEZeroAnlysErr | -20015 | dt must be ≥ 0. |

DtGTZeroAnlysErr | -20016 | dt must be > 0. |

DutyCycleAnlysErr | -20011 | The duty cycle must be equal to or fall between 0 and 100: 0 ≤ duty cycle ≤ 100. |

EgnValChgedAnlysErr | -20074 | Reordering eigenvalues changed some complex ones. |

EmptyPolyAnlysWarn | 20012 | Warning: The input polynomial is empty. |

EqRplDesignAnlysErr | -20031 | The filter cannot be designed with the specified input parameters. |

EqSamplesAnlysErr | -20002 | The input sequences must be the same size. |

EvenSizeAnlysErr | -20033 | The number of coefficients must be odd for this filter. |

FactorAnlysErr | -20043 | The level of factors is outside the allowable range of some data. |

FFSRInvalidAnlysErr | -20067 | The input fundamental frequency or sampling rate is equal to zero. |

FFTSizeGTZeroAnlysErr | -20115 | The FFT size must be greater than zero. |

FinalGTZeroAnlysErr | -20027 | The final value must be > 0. |

FltBuffOvflowAnlysErr | -20075 | The filter buffer overflows. |

FreedomAnlysErr | -20052 | The degree of freedom must be greater than zero and less than the length of the input sequence. |

IIRFilterInfoAnlysErr | -20066 | The information in the IIR filter structure is not correct. |

IndexLengthAnlysErr | -20018 | The index and length must meet the condition 0 ≤ (index + length) < samples. |

IndexLTSamplesAnlysErr | -20017 | The following condition must be met: 0 ≤ index < samples. |

InitStateAnlysErr | -20064 | The internal memory state of this function was not initialized correctly. |

InputNaNAnlysErr | -20104 | Input parameters have at least one NaN element. |

IntervalsAnlysErr | -20038 | The number of intervals must be > 0. |

InvalidDoubleAnlysErr | -20068 | Input parameters has at least one element that is Inf, NaN, DBL_MAX, or DBL_MIN. |

InvProbAnlysErr | -20054 | The probability must be greater than or equal to zero and less than one. |

InvSelectionAnlysErr | -20061 | The selection is invalid. |

InvStdDevAnlysWarn | 20011 | Warning: The input standard deviation is invalid. |

LeakAnlysErr | -20030 | The leakage coefficient, leak, and the step-size parameter, μ, must meet: 0 ≤ leak ≤ μ. |

LevelsAnlysErr | -20042 | The number of levels is out of range. |

MatrixInfNanAnlysErr | -20068 | Input parameter has at least one element that is Inf or NaN or DBL_MIN or DBL_MAX. |

MatrixInfNanAnlysWarn | 20030 | Warning: The input matrix has at least one element with a value of Inf or NaN. |

MatrixLnAnlysErr | -20072 | The logarithm of the input matrix cannot be computed. |

MatrixMulAnlysErr | -20039 | The number of columns in the first matrix is not equal to the number of rows in the second matrix or vector. |

MaxIterAnlysErr | -20062 | The maximum number of iterations was exceeded. |

MaxXformSizeAnlysErr | -20010 | The maximum allowable transform size has been exceeded. |

MixedSignAnlysErr | -20036 | The elements of the y values array must be nonzero and either all positive or all negative. |

ModelAnlysErr | -20048 | The Random Effect model was requested when the Fixed Effect model is required. |

NegNumAnlysErr | -20059 | Negative number error. |

NegZeroNumAnlysErr | -20140 | The number is negative or zero. |

NoAnlysErr | 0 | The call was successful. |

NotSupportedAnlysErr | -20078 | This functionality is not supported on this platform. |

NyquistAnlysErr | -20020 | The cut-off frequency, fc, must meet: 0 ≤ fc ≤ fs/2. |

ObservationsAnlysErr | -20044 | Zero observations were made at some level of a factor. |

OddSizeAnlysErr | -20034 | The number of coefficients must be even for this filter. |

OrderGEZeroAnlysErr | -20103 | The order must be greater than or equal to zero. |

OrderGTZeroAnlysErr | -20021 | The order must be > 0. |

OutOfMemAnlysErr | -20001 | There is not enough memory to perform the specified routine. |

OverflowAnlysErr | -20046 | There is an overflow in the calculation. |

PoleAnlysErr | -20050 | The interpolating function has a pole at the requested value. |

PolyAnlysErr | -20063 | The coefficients of the polynomial are invalid. |

PosDefAnlysErr | -20071 | The input matrix is not positive definite. |

PowerOfTwoAnlysErr | -20009 | The size of the input array must be a power of two: size = 2^{m}, 0 < m < 23. |

ProbabilityAnlysErr | -20053 | The probability must be between zero and one. |

RankAnlysErr | -20032 | The rank of the filter must meet 1 ≤ (2 rank +1) ≤ size. |

RankDeficient | 20001 | Warning: The matrix is rank deficient. |

ReorderAnlysWarn | 20005 | Warning: Reordering cannot be performed. |

RippleGTZeroAnlysErr | -20024 | The ripple amplitude must be > 0. |

RsmplBydInputAnlysErr | -20076 | The resample point cannot be calculated with the signal behind that of the input. |

SameSizeAnlysErr | -20070 | Matrices must have the same size. |

SameSizeAnlysWarn | 20004 | Warning: Matrices or vectors do not have the same size. |

SamplesGEFourAnlysErr | -20069 | The number of samples must be greater than or equal to four. |

SamplesGEOneAnlysErr | -20005 | The number of samples must be ≥ 1. |

SamplesGEThreeAnlysErr | -20007 | The number of samples must be ≥ 3. |

SamplesGETwoAnlysErr | -20006 | The number of samples must be ≥ 2. |

SamplesGEZeroAnlysErr | -20004 | Number of samples must be greater than or equal to zero. |

SamplesGTZeroAnlysErr | -20003 | The number of samples must be > 0. |

SamplesGTZeroAnlysWarn | 20002 | Warning: The number of samples must be greater than zero. |

ShiftRangeAnlysErr | -20102 | The shifts must meet: |shifts| < samples. |

SingularMatrixAnlysErr | -20041 | The system of equations cannot be solved because the input matrix is singular. |

SingularMatrixAnlysWarn | 20003 | Warning: The matrix is singular. |

SizeGTOrderAnlysErr | -20037 | The number of data points in the y values array must be greater than the order. |

SquareMatrixAnlysErr | -20040 | The input matrix must be a square matrix. |

StdDevAnlysErr | -20035 | The standard deviation must be greater than zero for normalization. |

StepSizeAnlysErr | -20029 | The step-size, μ, must meet: 0 ≤ μ ≤ 0.1. |

TableAnlysErr | -20056 | The contingency table has a negative number. |

TimeNotAscendAnlysErr | -20077 | The time points are not in ascending order. |

UpperGELowerAnlysErr | -20019 | The upper value must be ≥ the lower value. |

WidthGTZeroAnlysErr | -20026 | The width must be > 0. |

WidthLTSamplesAnlysErr | -20013 | The width must meet: 0 < width < samples. |

ZeroNumAnlysErr | -20141 | The number is zero. |

ZeroPolyAnlysErr | -20111 | The input polynomial coefficients are all zeros. |

ZeroVectorAnlysErr | -20065 | The internal memory of this function was not initialized correctly. |

Code | Symbolic Name | Error Message |
---|---|---|

20030 | MatrixInfNanAnlysWarn | Warning: The input matrix has at least one element with a value of Inf or NaN. |

20012 | EmptyPolyAnlysWarn | Warning: The input polynomial is empty. |

20011 | InvStdDevAnlysWarn | Warning: The input standard deviation is invalid. |

20010 | ArraySizeAnlysWarn | Warning: The sizes of the input arrays do not meet the specified conditions. |

20006 | AccuracyAnlysWarn | Warning: The computation result might be inaccurate. |

20005 | ReorderAnlysWarn | Warning: Reordering cannot be performed. |

20004 | SameSizeAnlysWarn | Warning: Matrices or vectors do not have the same size. |

20003 | SingularMatrixAnlysWarn | Warning: The matrix is singular. |

20002 | SamplesGTZeroAnlysWarn | Warning: The number of samples must be greater than zero. |

20001 | RankDeficient | Warning: The matrix is rank deficient. |

0 | NoAnlysErr | The call was successful. |

-20001 | OutOfMemAnlysErr | There is not enough memory to perform the specified routine. |

-20002 | EqSamplesAnlysErr | The input sequences must be the same size. |

-20003 | SamplesGTZeroAnlysErr | The number of samples must be > 0. |

-20004 | SamplesGEZeroAnlysErr | The number of samples must be ≥ 0. |

-20005 | SamplesGEOneAnlysErr | The number of samples must be ≥ 1. |

-20006 | SamplesGETwoAnlysErr | The number of samples must be ≥ 2. |

-20007 | SamplesGEThreeAnlysErr | The number of samples must be ≥ 3. |

-20008 | ArraySizeAnlysErr | The input arrays do not contain the correct number of data values for this function. |

-20009 | PowerOfTwoAnlysErr | The size of the input array must be a power of two: size = 2^{m}, 0 < m < 23. |

-20010 | MaxXformSizeAnlysErr | The maximum allowable transform size has been exceeded. |

-20011 | DutyCycleAnlysErr | The duty cycle must be equal to or fall between 0 and 100: 0 ≤ duty cycle ≤ 100. |

-20012 | CyclesAnlysErr | The number of cycles must be > 0 and ≤ the number of samples. |

-20013 | WidthLTSamplesAnlysErr | The width must meet: 0 < width < samples. |

-20014 | DelayWidthAnlysErr | The following conditions must be met: 0 ≤ (delay + width) < samples. |

-20015 | DtGEZeroAnlysErr | dt must be ≥ 0. |

-20016 | DtGTZeroAnlysErr | dt must be > 0. |

-20017 | IndexLTSamplesAnlysErr | The following condition must be met: 0 ≤ index < samples. |

-20018 | IndexLengthAnlysErr | The following condition must be met: 0 ≤ (index + length) < samples. |

-20019 | UpperGELowerAnlysErr | The upper value must be ≥ the lower value. |

-20020 | NyquistAnlysErr | The cut-off frequency, fc, must meet: 0 ≤ fc ≤ fs/2. |

-20021 | OrderGTZeroAnlysErr | The order must be > 0. |

-20022 | DecFactAnlysErr | The decimating factor must meet: 0 < decimating factor ≤ samples. |

-20023 | BandSpecAnlysErr | The following conditions must be met: 0 < f_low ≤ f_high ≤ fs/2. |

-20024 | RippleGTZeroAnlysErr | The ripple amplitude must be > 0. |

-20025 | AttenGTZeroAnlysErr | The attenuation must be > 0. |

-20026 | WidthGTZeroAnlysErr | The width must be > 0. |

-20027 | FinalGTZeroAnlysErr | The final value must be > 0. |

-20028 | AttenGTRippleAnlysErr | The attenuation value must be greater than the ripple amplitude. |

-20029 | StepSizeAnlysErr | The step-size, μ, must meet: 0 ≤ μ ≤ 0.1. |

-20030 | LeakAnlysErr | The leakage coefficient, leak, and the step-size parameter, μ, must meet: 0 ≤ leak ≤ μ. |

-20031 | EqRplDesignAnlysErr | The filter cannot be designed with the specified input parameters. |

-20032 | RankAnlysErr | The rank of the filter must meet: 1 ≤ (2*rank + 1) ≤ size. |

-20033 | EvenSizeAnlysErr | The number of coefficients must be odd for this filter. |

-20034 | OddSizeAnlysErr | The number of coefficients must be even for this filter. |

-20035 | StdDevAnlysErr | The standard deviation must be greater than zero for normalization. |

-20036 | MixedSignAnlysErr | The elements of the y values array must be nonzero and either all positive or all negative. |

-20037 | SizeGTOrderAnlysErr | The number of data points in the y values array must be greater than the order. |

-20038 | IntervalsAnlysErr | The number of intervals must be > 0. |

-20039 | MatrixMulAnlysErr | The number of columns in the first matrix is not equal to the number of rows in the second matrix or vector. |

-20040 | SquareMatrixAnlysErr | The input matrix must be a square matrix. |

-20041 | SingularMatrixAnlysErr | The system of equations cannot be solved because the input matrix is singular. |

-20042 | LevelsAnlysErr | The number of levels is out of range. |

-20043 | FactorAnlysErr | The level of factors is outside the allowable range of some data. |

-20044 | ObservationsAnlysErr | Zero observations were made at some level of a factor. |

-20045 | DataAnlysErr | The total number of data points must be equal to the product of levels/each factor * observations/cell. |

-20046 | OverflowAnlysErr | There is an overflow in the calculation. |

-20047 | BalanceAnlysErr | The data is unbalanced. All cells must contain the same number of observations. |

-20048 | ModelAnlysErr | The Random Effect model was requested when the Fixed Effect model is required. |

-20049 | DistinctAnlysErr | The x-values must be distinct. |

-20050 | PoleAnlysErr | The interpolating function has a pole at the requested value. |

-20051 | ColumnAnlysErr | All values in the first column of X matrix must be one. |

-20052 | FreedomAnlysErr | The degree of freedom must be greater than zero and less than the length of the input sequence. |

-20053 | ProbabilityAnlysErr | The probability must be between zero and one. |

-20054 | InvProbAnlysErr | The probability must be greater than or equal to zero and less than one. |

-20055 | CategoryAnlysErr | The number of categories or samples must be greater than one. |

-20056 | TableAnlysErr | The contingency table has a negative number. |

-20057 | BetaFuncAnlysErr | The parameter to the beta function should be 0 < p < 1. |

-20058 | DimensionAnlysErr | Invalid number of dimensions or dependent variables. |

-20059 | NegNumAnlysErr | Negative number error. |

-20060 | DivByZeroAnlysErr | Divide by zero error. |

-20061 | InvSelectionAnlysErr | The selection is invalid. |

-20062 | MaxIterAnlysErr | The maximum number of iterations was exceeded. |

-20063 | PolyAnlysErr | The coefficients of the polynomial are invalid. |

-20064 | InitStateAnlysErr | The internal memory state of this function was not initialized correctly. |

-20065 | ZeroVectorAnlysErr | The internal memory of this function was not initialized correctly. |

-20066 | IIRFilterInfoAnlysErr | The information in the IIR filter structure is not correct. |

-20067 | FFSRInvalidAnlysErr | The input fundamental frequency or sampling rate is equal to zero. |

-20068 | InvalidDoubleAnlysErr | Input parameters has at least one element that is Inf, NaN, DBL_MAX, or DBL_MIN. |

-20068 | MatrixInfNanAnlysErr | Input parameter has at least one element that is Inf or NaN or DBL_MIN or DBL_MAX. |

-20069 | SamplesGEFourAnlysErr | The number of samples must be greater than or equal to four. |

-20070 | SameSizeAnlysErr | Matrices must have the same size. |

-20071 | PosDefAnlysErr | The input matrix is not positive definite. |

-20072 | MatrixLnAnlysErr | The logarithm of the input matrix cannot be computed. |

-20073 | CloseEgnValAnlysErr | The eigenvalues cannot be reordered because some of them are too close. |

-20074 | EgnValChgedAnlysErr | Reordering eigenvalues changed some complex ones. |

-20075 | FltBuffOvflowAnlysErr | The filter buffer overflows. |

-20076 | RsmplBydInputAnlysErr | The resample point cannot be calculated with the signal behind that of the input. |

-20077 | TimeNotAscendAnlysErr | The time points are not in ascending order. |

-20078 | NotSupportedAnlysErr | This functionality is not supported on this platform. |

-20101 | BaseGETopAnlysErr | Parameter must meet the condition Top > Base. |

-20102 | ShiftRangeAnlysErr | The shifts must meet: |shifts| < samples. |

-20103 | OrderGEZeroAnlysErr | The order must be greater than or equal to zero. |

-20104 | InputNaNAnlysErr | Input parameters have at least one NaN element. |

-20111 | ZeroPolyAnlysErr | The input polynomial coefficients are all zeros. |

-20115 | FFTSizeGTZeroAnlysErr | The FFT size must be greater than zero. |

-20140 | NegZeroNumAnlysErr | The number is negative or zero. |

-20141 | ZeroNumAnlysErr | The number is zero. |