Edit IVI Switch Step Dialog Box
IVI Switching Mode
The IVI Switch step type supports the following IVI switch operations:
- Connect/Disconnect—Connects or disconnects the Source and Destination channels in the switch instrument.
- Configure Scan—Configures the switch module for scanning.
- Start Scan—Initiates a scanning operation.
- Wait—Blocks operations until all switches debounce for an instrument.
- Configure Switch—Configures channels as Configuration or Source channels and configures specific paths between channels.
- Send Software Trigger—Sends a software trigger command to trigger the instrument during a scanning operation.
- Abort Scan—Cancels a scanning operation.
- Get Information—Retrieves low-level status and information from the instrument.