Formatting Configuration Data: Routes

NI Switch Executive 2015 Help

Edition Date: August 2015

Part Number: 370404J-01

»View Product Info

Use the following guidelines when formatting Routes in Excel.

Note Note  NI Switch Executive replaces the attribute value with "Imported Value if Unspecified" only at import. If "Imported Value if Unspecified" is N/A, NI Switch Executive ignores the attribute at import.
Attribute (Column)Valid ValuesRequiredImported Value if Unspecified
Route Name String Yes None
Endpoint1 String Yes* Uses route spec
Endpoint2 String Yes* Uses route spec
Specification String Yes* Uses endpoints
Type Specified By Full Path, Find By Endpoints, Find If Full Path Fails Yes None
Multiconnect Mode Multiconnect, No Multiconnect Yes None
Comment String

Notice: Use ^t, ^r, and ^n for the tab, carriage return, and new line characters, respectively.
No Empty String
Wire Mode 1, 2, or 4 No Uses Endpoint1 or route specification
Settling Time (s) Float No None
Impedance (Ohm) Float No None
Bandwidth (Hz) Float No None
DC Voltage (V) Float No None
AC Voltage (V) Float No None
DC Switching Current (A) Float No None
AC Switching Current (A) Float No None
DC Carry Current (A) Float No None
AC Carry Current (A) Float No None
DC Switching Power (W) Float No None
AC Switching Power (W) Float No None
DC Carry Power (W) Float No None
AC Carry Power (W) Float No None

* One of these is required: either both endpoints or the specification. When all three are specified, the specification is used before the endpoints.

WAS THIS ARTICLE HELPFUL?

Not Helpful