Counter Input:Measurement Type Property

DAQmx - Data Acquisition VIs and Functions

Edition Date: January 2019

Part Number: 370469AP-01

»View Product Info
Download Help (Windows Only)

Short Name: CI.MeasType

Property of DAQmx Channel

Indicates the measurement to take with the channel.

Count Edges (10125) Count edges of a digital signal.
Frequency (10179) Measure the frequency of a digital signal.
Period (10256) Measure the period of a digital signal.
Two Edge Separation (10267) Measure time between edges of two digital signals.
Semi Period (10289) Measure the time between state transitions of a digital signal.
Pulse Width (10359) Measure the width of a pulse of a digital signal.
Position:Angular Encoder (10360) Angular position measurement using an angular encoder.
Position:Linear Encoder (10361) Linear position measurement using a linear encoder.
GPS Timestamp (10362) Timestamp measurement, synchronizing the counter to a GPS receiver.
Pulse Frequency (15864) Pulse measurement, returning the result as frequency and duty cycle.
Pulse Time (15865) Pulse measurement, returning the result as high time and low time.
Pulse Ticks (15866) Pulse measurement, returning the result as high ticks and low ticks.
Duty Cycle (16070) Measure the duty cycle of a digital signal.
Velocity:Angular Encoder (16078) Angular velocity measurement using an angular encoder.
Velocity:Linear Encoder (16079) Linear velocity measurement using a linear encoder.

Remarks

The following table lists the characteristics of this property.

Permissionsread only
Resettableno
Settable while task is runningdevice-specific
Available in Run-Time Engineyes

WAS THIS ARTICLE HELPFUL?

Not Helpful