DAQmx Disconnect Terminals (VI)

DAQmx - Data Acquisition VIs and Functions

Edition Date: January 2019

Part Number: 370469AP-01

»View Product Info
Download Help (Windows Only)
Owning Palette: DAQmx Signal Routing VIs
Installed With: NI-DAQmx

Removes signal routes you created by using the DAQmx Connect Terminals VI. The DAQmx Disconnect Terminals VI cannot remove task-based routes, such as those you create through timing and triggering configuration.

When this VI runs, it immediately removes the route. This type of routing is called immediate routing.

DAQmx Disconnect Terminals

/images/reference/en-XX/help/370469AP-01/civrn.gif

source terminal specifies the originating terminal of the route. A DAQmx terminal constant lists all terminals available on devices installed in the system. You also can specify a source terminal by wiring a string that contains a terminal name.

/images/reference/en-XX/help/370469AP-01/civrn.gif

destination terminal specifies the receiving terminal of the route. A DAQmx terminal constant provides a list of all terminals available on devices installed in the system. You also can specify a destination terminal by wiring a string that contains a terminal name.

/images/reference/en-XX/help/370469AP-01/cerrcodeclst.gif

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

/images/reference/en-XX/help/370469AP-01/ierrcodeclst.gif

error out contains error information. This output provides standard error out functionality.

WAS THIS ARTICLE HELPFUL?

Not Helpful