|Download Help (Windows Only)|
Short Name: ActiveLoad.SourcingCurrent
Property of niHSDIO
Specifies the amount of current for the driver to source if the input voltage is less than the commutating voltage.
Valid values range from 1.5 mA to 24 mA.
The default value is 1.5 mA.
The units are amps (A).
|Note This property takes effect only if the Active Load Mode property is set to Active Load Enabled When Tristate in the current session.|
You can select the following PFI channels and clocks for the active channel input of the property node using these strings: PFI1, PFI2, STROBE, and DDC_CLKOUT . These strings are not case sensitive and can be grouped with the standard input strings separated by commas. The following are examples of valid string syntax: 0, 4, 6, PFI1, 7 or 0-12, STROBE, DDC_CLKOUT.
|Note Only NI 6556 devices support this property.|
|Note When the Attribute Committal Strategy property is configured to Immediately upon set (Voltage), setting this property while the session is in the Committed or Running state causes the new value to take effect by the time the property returns.|
The following table lists the characteristics of this property.