|Download Help (Windows Only)|
Short Name: DataPos.EventDelay
Property of niHSDIO
Specifies, per channel, the delay after the Sample clock rising edge when the device initiates an event. Event delay is expressed as a fraction of the clock period (for example, a fraction of 1/Sample clock rate).
|Note This property is supported only on PFI 1 and PFI 2 on NI 6555/6556 devices.|
Valid values range from –1 to 2 clock cycles in increments of 0.001 cycles.
The default value is 0.
The following table lists the characteristics of this property.