|Download Help (Windows Only)|
Short Name: DataPos.TrigDeskew
Property of niHSDIO
Specifies, per channel, the fixed time delay after the Sample clock rising edge when the device samples on a trigger. The value of this property is added to the value of the Trigger Delay property to determine the total delay. Unlike the Trigger Delay property, this property is specified in seconds.
|Note This property is supported only on PFI 1 and PFI 2 on NI 6555/6556 devices.|
Valid values, in seconds, depend on your clock rate and are represented by the equation –2(1/ f ) to +3(1/ f ), where f is the frequency of your clock rate.
The default value is 0.
The following table lists the characteristics of this property.