|Download Help (Windows Only)|
Short Name: DataVolt.High
Property of niHSDIO
Specifies the high data voltage level for the session.
This property applies to static and dynamic data operations.
|Note On NI 6555/6556 devices only, if the Attribute Committal Strategy property is configured to Immediately upon set (Voltage), setting this property while the session is in the Committed or Running state causes the new value to take effect by the time the property returns.|
|Note On NI 6555/6556 devices only, you can select the following PFI channels and clocks for the active channel input of the property node using these strings: PFI1 , PFI2 , STROBE , and DDC_CLKOUT . These strings are not case sensitive and can be grouped with the standard input strings separated by commas. The following are examples of valid string syntax: 0, 4, 6, PFI1, 7 or 0-12, STROBE, DDC_CLKOUT.|
The following table lists the characteristics of this property.
|High-level VIs||niHSDIO Configure Voltage|