Voltage Levels:Data Low Property

NI Digital Waveform Generator/Analyzer Help

Edition Date: June 2013

Part Number: 370520P-01

»View Product Info
Download Help (Windows Only)

Short Name: DataVolt.Low

Property of niHSDIO

Specifies the low data voltage level for the session.

This property applies to static and dynamic data operations.

Note   On NI 6555/6556 devices only, if the Attribute Committal Strategy property is configured to Immediately upon set (Voltage), setting this property while the session is in the Committed or Running state causes the new value to take effect by the time the property returns.
Note   On NI 6555/6556 devices only, you can select the following PFI channels and clocks for the active channel input of the property node using these strings: PFI1, PFI2, STROBE, and DDC_CLKOUT. These strings are not case sensitive and can be grouped with the standard input strings separated by commas. The following are examples of valid string syntax: 0, 4, 6, PFI1, 7 or 0-12, STROBE, DDC_CLKOUT.

Remarks

The following table lists the characteristics of this property.

Datatype fD
PermissionsRead/Write
High-level VIs niHSDIO Configure Voltage
Channel-based Yes
ResettableNo

WAS THIS ARTICLE HELPFUL?

Not Helpful