Triggers:Start:Digital Edge:Impedance Property

NI Digital Waveform Generator/Analyzer Help

Edition Date: June 2013

Part Number: 370520P-01

»View Product Info
Download Help (Windows Only)

Short Name: StartTrig.DigEdge.Impedance

Property of niHSDIO

Specifies the impedance on the channel configured for the digital edge Start trigger. Valid values for this property vary by device. Refer to your device documentation for more information about the valid impedance settings.

This property is only set if the trigger is configured to use a PFI channel, and it is ignored if the trigger is configured for any other channel.

Device Supported Value
NI 6541/6542 10000
NI 6544/6545/6547/6548 50000
NI 6551/6552 All NI 6551/6552 devices support 50 as a valid impedance value. NI 6551/6552 devices also support either 10000 or 50000 as valid impedance values depending on the revision of your device. Refer to the NI PXI/PCI-6551/6552 Specifications for more information about supported values.
NI 6555/6556 NI 6555/6556 devices do not support this property.
NI 656 x 100 in LVDS terminal configuration or 10000 in single-ended terminal configuration

Related Topics

Remarks

The following table lists the characteristics of this property.

Datatype fD
PermissionsRead/Write
High-level VIs N/A
Channel-based No
ResettableNo

WAS THIS ARTICLE HELPFUL?

Not Helpful