|NI-SCOPE 18.7 (English | Japanese)|
Short Name: Digital Gain
Property of niScope
Applies gain to the specified channel in hardware before any onboard signal processing occurs. The default value is 1.
The output of the digital gain/offset block is as follows:
(ADC value × digital gain) + digital offset
Valid Values: -1.5 to 1.5
|Note This property can be used only with high-speed digitizers that support onboard signal processing (OSP). NI-SCOPE returns an error if you use this property with a device that does not support OSP.|
The following table lists the characteristics of this property.