|Download Help (Windows Only)|
Owning Palette: Real-Time VIs
Requires: Real-Time Module. This topic might not match its corresponding palette in LabVIEW depending on your operating system, licensed product(s), and target.
Use the RT Utilities VIs to perform common tasks related to RT targets.
The VIs on this palette can return general LabVIEW error codes.
The VIs on this palette appear only in the RT context, and will not appear if an RT target is not added to the project.
|RT Calibrate Touchscreen||Opens an interactive wizard that allows end users to calibrate touch panel monitors. This VI runs only on RT targets that support the embedded UI. Refer to the specific RT target hardware documentation to learn if the target supports an embedded UI.|
|RT Debug String||Sends a string to an output port for display, or writes a string to the system log.|
|RT Get CPU Loads||Monitors the distribution of load on the CPUs in the system. For each CPU in the system, this VI returns the total load as a percentage of capacity. This VI also returns the percentage of CPU time devoted to each priority level, the percentage of idle CPU time, and the percentage of CPU time devoted to Timed Structures and interrupt service routines (ISRs).|
|RT Get Timestamp||Inserts a 64-bit timestamp value from a high-precision timing source into a preallocated array at an index value specified by iteration. The timestamp value indicates the time when the RT Get Timestamp VI executes on the RT target.|
|RT LEDs||Controls the LEDs on all RT Series devices.|
|RT Read Switch||Reads the switch state of DIP switches on a networked RT Series device.|
|RT Timestamp Analysis||Analyzes the array of timestamps returned by the RT Get Timestamp VI.|
|NI System Configuration VIs||Use the System Configuration VIs to gather information and perform tasks programmatically on both local and remote systems.|