|NI-DCPower (English | Japanese)|
Short Name: Current Level Range
Property of niDCPower
Specifies the current level range, in amps, for the specified channel(s).
The range defines the valid values to which the current level can be set. Use the Current Level Autorange property to enable automatic selection of the current level range.
The Current Level Range property is applicable only if the Output Function property is set to DC Current.
|Note The channel must be enabled for the specified current level range to take effect. Refer to the Output Enabled property for more information about enabling the output channel.|
For valid ranges for your device, refer to Ranges.
The following table lists the characteristics of this property.
|High-level VIs||niDCPower Configure Current Level Range|