|NI-DCPower (English | Japanese)|
Short Name: OVP Limit
Property of niDCPower
Determines the voltage limit, in volts, beyond which overvoltage protection (OVP) engages. Limit is specified as a positive value, but symmetric positive and negative limits are enforced simultaneously. For example, setting the OVP Limit to 65 will configure the OVP feature to trigger an OVP error if the output exceeds ±65 V.
|Note Refer to Supported Properties by Device for information about supported devices.|
Valid Values:Vary by device.
Default Value:Refer to Supported Properties by Device for the default value by device.
The following table lists the characteristics of this property.