|NI-DCPower (English | Japanese)|
Short Name: Pulse Bias Voltage Limit
Property of niDCPower
Specifies the pulse voltage limit, in volts, that the output cannot exceed when generating the desired current on the specified channel(s) during the off phase of a pulse. Limit is specified as a positive value, but symmetric positive and negative limits are enforced simultaneously.
|Note The channel must be enabled for the specified pulse current limit to take effect. Refer to the Output Enabled property for more information about enabling the output channel.|
|Note Refer to Supported Properties by Device for information about supported devices.|
Valid Values: The valid values for this property are defined by the values you specify for the Pulse Voltage Limit Range property.
The following table lists the characteristics of this property.
|High-level VIs||niDCPower Configure Pulse Bias Voltage Limit|