|NI-DCPower (English | Japanese)|
Short Name: Pulse Current Limit Low
Property of niDCPower
Specifies the minimum current, in amps, that the output can produce when generating the desired pulse voltage on the specified channel(s) during the on phase of a pulse.
You must also specify a Pulse Current Limit High to complete the asymmetric range.
|Note The channel must be enabled and the output relay must be connected for the specified limit to take effect. Refer to the Output Enabled property and the Output Connected property for more information about enabling the output channel and connecting the output relay respectively.|
|Note Refer to Supported Properties by Device for information about supported devices.|
|Note The limit may be extended beyond the selected limit range if the Overranging Enabled property is set to TRUE or if the Output Function property is set to a pulsing function.|
Default Value: Refer to Supported Properties by Device for the default value by device.
The following table lists the characteristics of this property.