|NI-DCPower (English | Japanese)|
Short Name: Pulse Voltage Level
Property of niDCPower
Specifies the pulse voltage level, in volts, that the device attempts to generate on the specified channel(s) during the on phase of a pulse.
This property is applicable only if the Output Function property is set to Pulse Voltage.
|Note The channel must be enabled for the specified pulse voltage level to take effect. Refer to the Output Enabled property for more information about enabling the output channel.|
|Note Refer to Supported Properties by Device for information about supported devices.|
Valid Values: The valid values for this property are defined by the values you specify for the Pulse Voltage Level Range property.
The following table lists the characteristics of this property.
|High-level VIs||niDCPower Configure Pulse Voltage Level|