|NI-DCPower (English | Japanese)|
Short Name: Voltage Limit Autorange
Property of niDCPower
Specifies whether NI-DCPower automatically selects the voltage limit range based on the desired voltage limit for the specified channel(s).
If you set this property to On, NI-DCPower ignores any changes you make to the Voltage Limit Range property. If you change the Voltage Limit Autorange property from On to Off, NI-DCPower retains the last value that the Voltage Limit Range property was set to (or the default value if it was never set) and uses that value as the voltage limit range.
Refer to the Voltage Limit Range property for information about which range NI-DCPower automatically selects.
The Voltage Limit Autorange property is applicable only if the Output Function property is set to DC Current.
Default Value:Refer to Supported Properties by Device for the default value by device.
NI-DCPower does not automatically select the voltage limit range.
NI-DCPower automatically selects the voltage limit range.
The following table lists the characteristics of this property.