List of New Commands, Variables, Objects, Properties, Methods, and Events
Version 2011
New General Commands and Variables
| CharMapDlgShow | Opens the dialog box for character table. |
| CharMapFont | Specifies the name of the font in the dialog box of the character table. |
| CharMapFontEnabled | Specifies whether you can select the font in the dialog box of the character table. |
| CharMapText: | Receives the character selected in the character table. |
| BulkDataLoadingMode: | Specifies when DIAdem loads bulk data into the Data Portal. |
| CharMapDlgShow | Opens the dialog box for character table. |
| CharMapFont | Specifies the name of the font in the dialog box of the character table. |
| CharMapFontEnabled | Specifies whether you can select the font in the dialog box of the character table. |
| CharMapText: | Receives the character selected in the character table. |
| FTPConnect | Connects to an FTP server. |
| FTPConnectionHandle | Specifies the handle for the FTP connection. |
| FTPDisConnect | Disconnects from the FTP server. |
| FTPDownload | Downloads a file from an FTP server. |
| FTPFileName | Specifies the filename. The file name may also contain wildcards. The parameter FTPFileName is case sensitive. |
| FTPPassword | Specifies the password for the FTP connection. |
| FTPRetry | Specifies whether DIAdem retries sending lost data packets following a timeout. |
| FTPServerName | Specifies the name or the IP address of the server or the FTP connection. |
| FTPSourcePath | Specifies the source path. The parameter FTPSourcePath is case sensitive. |
| FTPState | Receives information as to whether the FTP connection was successful. |
| FTPTargetPath | Specifies the target path. |
| FTPTimeout | Specifies in seconds the time that elapses before DIAdem times out the connection attempt. |
| FTPUserName | Specifies the user name for the FTP connection. |
| InstallationInfo: | Specifies information about the current installation. |
| InstallationKeyword | Specifies the type of installation information that you request. |
| KeepWfProperties | Specifies whether DIAdem maintains the waveform properties during this operation. The default value is FALSE and specifies that DIAdem does not maintain the waveform properties. |
| ScriptCMDInterfaceName | Specifies the name of the interface for which DIAdem displays CodeCompletion. |
| ScriptCMDItemName | Specifies the name of the function or variable that was registered as user function or with the GlobDim command. |
| ScriptCMDRegister | Allows CodeCompletion also for encrypted user functions. DIAdem takes the information for CodeCompletion from the TLB file. |
| ScriptCMDTypeLibName | Specifies the file name of a TLB file. You can enter the file with the absolute path or a file name. If you do not specify a path, DIAdem expects the file to be in the program directory. |
| WfStartTime | Specifies the start time of the x-part of the waveform channel. |
| WfXStartTimeMode | Specifies the type of time reference when converting numeric channels to waveform channels, and whether DIAdem considers the waveform start time when converting waveform channels to numeric channels or when generating a channel from the x-part of a waveform channel. |
New Commands and Variables in DIAdem REPORT
| CurrXChnNo | Specifies the current number of the x-channel of a curve. |
| CurrXValue | Specifies the current x-value of the curve. |
| CurrYChnNo | Specifies the current number of the y-channel of a curve. |
| CurrYValue | Specifies the current y-value of the curve. |
| CurrZChnNo | Specifies the current number of the z-channel of a curve. |
| CurrZValue | Specifies the current z-value of the curve. |
| CurveObject | Specifies the curve that contains the curve section. |
| CurveSnippet | Creates a curve section which you can insert into the text as an expression. |
| CurveSnippetSize | Specifies the length of the curve section. Specify the length as the number of spaces which DIAdem replaces with the curve section. |
| D2CoordinateBoundingType | Specifies how DIAdem determines the position of a channel-bound coordinate in a 2D axis system. |
| D2CoordinateType | Specifies whether you can freely select the coordinate in a 2D axis system, or whether it is bound to a channel. |
| D2CurveArrowLnColor | Specifies the color of the comment arrows in the Coordinate 2D display mode. |
| D2CurveArrowLnColRGB | Specifies the RGB values for the color of the comment arrows in the Coordinate 2D display mode. |
| D2CurveArrowLnType | Specifies the line style of the comment arrows in the Coordinate 2D display mode. |
| D2CurveArrowLnWidth | Specifies the line width and the size of comment arrows in the Coordinate 2D display mode. |
| D2CurveArrowSymbBeg | Specifies which arrowhead DIAdem draws at the beginning of comment arrows in the Coordinate 2D display mode. |
| D2CurveArrowSymbEnd | Specifies which arrowhead DIAdem draws at the end of comment arrows in the Coordinate 2D display mode. |
| D2CurveCommentVisible | Specifies whether DIAdem displays the comment in the Coordinate 2D display mode. |
| D2CurveFrameBackFMode | Specifies the color shading type of comments in the Coordinate 2D display mode. |
| D2CurveFrameBackFVariant | Specifies the color shading direction of comments in the Coordinate 2D display mode. |
| D2CurveFrameBkColor | Specifies the background color for text in comments in the Coordinate 2D display mode. |
| D2CurveFrameBkColRGB | Specifies the RGB values of the background color for text in comments in the Coordinate 2D display mode. |
| D2CurveFrameBkColRGB2 | Specifies the RGB values of the second background color for the color shading of comments in the Coordinate 2D display mode. |
| D2CurveFrameDeltaX | Specifies the horizontal distance of the comment in the Coordinate 2D display mode to the origin of the axis system, as a percentage of the worksheet, in centimeters or inches. |
| D2CurveFrameDeltaY | Specifies the vertical distance of the comment in the Coordinate 2D display mode to the origin of the axis system, as a percentage of the worksheet, in centimeters or inches. |
| D2CurveFrameHeight | Specifies the height of the comment in the Coordinate 2D display mode, as a percentage of the worksheet, in centimeters or inches. |
| D2CurveFrameLnColor | Specifies the frame color of comments in the Coordinate 2D display mode. |
| D2CurveFrameLnColRGB | Specifies the RGB values for the frame color of comments in the Coordinate 2D display mode. |
| D2CurveFrameLnType | Specifies the line style of the frame of comments in the Coordinate 2D display mode. |
| D2CurveFrameLnWidth | Specifies the line width of the frame of comments in the Coordinate 2D display mode. |
| D2CurveFrameWidth | Specifies the width of the comment in the Coordinate 2D display mode, as a percentage of the worksheet, in centimeters or inches. |
| D2CurveTxt | Specifies the text in comments in the Coordinate 2D display mode. |
| D2CurveTxtAlignment | Specifies the line alignment of comment text in the Coordinate 2D display mode. |
| D2CurveTxtBold | Specifies whether DIAdem displays the comment text in bold in the Coordinate 2D display mode. |
| D2CurveTxtColor | Specifies the font color of comment text in the Coordinate 2D display mode. |
| D2CurveTxtColorRGB | Specifies the RGB values for the font color of comment text in the Coordinate 2D display mode. |
| D2CurveTxtFont | Specifies the character set for comment text in the Coordinate 2D display mode. |
| D2CurveTxtItal | Specifies whether DIAdem displays the comment text in italics in the Coordinate 2D display mode. |
| D2CurveTxtSize | Specifies the font size of comment text in the Coordinate 2D display mode. |
| D2CurveTxtStrOut | Specifies whether DIAdem displays the comment text in strikethrough in the Coordinate 2D display mode. |
| D2CurveTxtUndl | Specifies whether DIAdem displays the comment text in underscored format in the Coordinate 2D display mode. |
| D2HdClip | Specifies whether DIAdem truncates table headings at the column bound. |
| D2HdWordWrap | Specifies whether DIAdem wraps table headings at the column bound. |
| D2LegPositionType | Specifies whether the legend of a 2D axis system is bound to an axis system, or whether you can position it freely. When the legend is bound to an axis system, DIAdem also moves the legend when you move the axis system. |
| D2LegPosSysRelatedX | Specifies the distance of the legend for a 2D axis system in x-direction. |
| D2LegPosSysRelatedY | Specifies the distance of the legend for a 2D axis system in y-direction. |
| D2LegPPositionType | Specifies whether the color legend of a 2D axis system is bound to an axis system, or whether you can position it freely. When the legend is bound to an axis system, DIAdem also moves the legend when you move the axis system. |
| D2LegPPosSysRelatedX | Specifies the distance of the color legend for a 2D axis system in x-direction. |
| D2LegPPosSysRelatedY | Specifies the distance of the color legend for a 2D axis system in y-direction. |
| D2PolLegPositionType | Specifies whether the legend of a polar axis system is bound to an axis system, or whether you can position it freely. When the legend is bound to an axis system, DIAdem also moves the legend when you move the axis system. |
| D2PolLegPosSysRelatedX | Specifies the distance of the legend for a polar axis system in x-direction. |
| D2PolLegPosSysRelatedY | Specifies the distance of the legend for a polar axis system in y-direction. |
| D2TabHdClip | Specifies whether DIAdem truncates global table headings at the column bound. |
| D2TabHdWordWrap | Specifies whether DIAdem wraps global table headings at the column bound. |
| D2TabNumClip | Specifies whether DIAdem truncates column entries at the column bound. |
| D2TabNumWordWrap | Specifies whether DIAdem wraps column entries at the column bound. |
| D2TabTextColumn | Specifies the column in the text list. |
| D2TabTextCount | Specifies the number of created or deleted entries in the text list. |
| D2TabTextList | Specifies the entry in the text list. |
| D2TabTextListAdd: | Creates new entries in the text list of a table. The entries are appended at the end of the text list. |
| D2TabTextListDel: | Deletes entries in the text list of a table. |
| D2TabTextListIns | Adds new entries to the text list of a table. |
| D2TabTextListLength | Receives the length of the text list. |
| D2TabTextRow | Specifies the row in the text list. |
| D3CConstX | Specifies the x-value that DIAdem displays for the Coordinate display mode, in the number-oriented mode. |
| D3CConstXName | Specifies the x-value that DIAdem displays for the Coordinate display mode. |
| D3CConstY | Specifies the y-value that DIAdem displays for the Coordinate display mode, in the number-oriented mode. |
| D3CConstYName | Specifies the y-value that DIAdem displays for the Coordinate display mode. |
| D3CConstZ | Specifies the z-value that DIAdem displays for the Coordinate display mode, in the number-oriented mode. |
| D3CConstZName | Specifies the z-value that DIAdem displays for the Coordinate display mode. |
| D3ConstCTType | Specifies the type of coordinate label of the 3D curve. |
| D3ConstX | Specifies the x-value that DIAdem displays for the Coordinate display mode, in the number-oriented mode. |
| D3ConstXName | Specifies the x-value that DIAdem displays for the Coordinate display mode. |
| D3ConstY | Specifies the y-value that DIAdem displays for the Coordinate display mode, in the number-oriented mode. |
| D3ConstYName | Specifies the y-value that DIAdem displays for the Coordinate display mode. |
| D3ConstZ | Specifies the z-value that DIAdem displays for the Coordinate display mode, in the number-oriented mode. |
| D3ConstZName | Specifies the z-value that DIAdem displays for the Coordinate display mode. |
| D3CoordinateBoundingType | Specifies how DIAdem determines the position of a channel-bound coordinate in a 3D axis system. |
| D3CoordinateType | Specifies whether you can freely select the coordinate in a 3D axis system, or whether it is bound to a channel. |
| D3CrvCDAddExtIso | Specifies whether DIAdem displays extended isolines when displaying characteristic diagrams. |
| D3CurveArrowLnColor | Specifies the color of the comment arrows in the Coordinate 3D display mode. |
| D3CurveArrowLnColRGB | Specifies the RGB values for the color of the comment arrows in the Coordinate 3D display mode. |
| D3CurveArrowLnType | Specifies the line style of the comment arrows in the Coordinate 3D display mode. |
| D3CurveArrowLnWidth | Specifies the line width and the size of comment arrows in the Coordinate 3D display mode. |
| D3CurveArrowSymbBeg | Specifies which arrowhead DIAdem draws at the beginning of comment arrows in the Coordinate 3D display mode. |
| D3CurveArrowSymbEnd | Specifies which arrowhead DIAdem draws at the end of comment arrows in the Coordinate 3D display mode. |
| D3CurveCommentVisible | Specifies whether DIAdem displays the comment in the Coordinate 3D display mode. |
| D3CurveConsiderIsoValForAutoScal | Specifies whether DIAdem includes the isovalues which DIAdem takes from a data channel, the contour table, or the extended isolines when autoscaling the axes. |
| D3CurveETAngle | Specifies the angle of the curve end label. |
| D3CurveETBackColor | Specifies the background color of the curve end labels. |
| D3CurveETBackColorRGB | Specifies the RGB values of the background color for the curve end labels. |
| D3CurveETBold | Specifies whether DIAdem displays the curve end label in bold type. |
| D3CurveETColAuto | Specifies whether the curve end labels are the same color as the curve. |
| D3CurveETColor | Specifies the color of the curve end labels. |
| D3CurveETColRGB | Specifies the RGB value of the color for the curve end label. |
| D3CurveETFont | Specifies the font for the curve end labels. |
| D3CurveETFrame | Specifies whether DIAdem frames each curve end label. |
| D3CurveETItal | Specifies whether DIAdem displays the curve end labels in italics. |
| D3CurveETPosXC | Specifies whether DIAdem displays the curve end labels at the x-value of the curve point or offset to the x-value. |
| D3CurveETPosYC | Specifies whether DIAdem displays the curve end labels at the y-value of the curve point or offset to the y-value. |
| D3CurveETRelPos | Specifies the position of the curve end label in relation to the curve. |
| D3CurveETShiftX | Specifies the horizontal offset of the curve end labels as a percentage. |
| D3CurveETShiftY | Specifies the vertical offset of the curve end labels as a percentage. |
| D3CurveETSize | Specifies the font size for the curve end labels. |
| D3CurveETStrOut | Specifies whether DIAdem crosses out the curve end labels. |
| D3CurveETTxt | Specifies the text for the end of the curve. |
| D3CurveETUndl | Specifies whether DIAdem underscores the curve end labels. |
| D3CurveExtIsoLineColor | Specifies the color of the extended isolines. |
| D3CurveExtIsoLineColRGB | Specifies the RGB color of the extended isolines. |
| D3CurveExtIsoLineInterval | Specifies the line partitioning for broken lines of extended isolines. |
| D3CurveExtIsoLineType | Specifies the line style of the extended isolines. |
| D3CurveExtIsoLineWidth | Specifies the line width of the extended isolines. |
| D3CurveExtIsoValNo | Specifies the number of extended isovalues. |
| D3CurveExtIsoValues | Contains the isovalues of the extended isolines. |
| D3CurveFrameBackFMode | Specifies the color shading type of comments in the Coordinate 3D display mode. |
| D3CurveFrameBackFVariant | Specifies the color shading direction of comments in the Coordinate 3D display mode. |
| D3CurveFrameBkColor | Specifies the background color for text in comments in the Coordinate 3D display mode. |
| D3CurveFrameBkColRGB | Specifies the RGB values of the background color for text in comments in the Coordinate 3D display mode. |
| D3CurveFrameBkColRGB2 | Specifies the RGB values of the second background color for the color shading of comments in the Coordinate 3D display mode. |
| D3CurveFrameDeltaX | Specifies the horizontal distance of the comment in the Coordinate 3D display mode to the origin of the axis system, as a percentage of the worksheet, in centimeters or inches. |
| D3CurveFrameDeltaY | Specifies the vertical distance of the comment in the Coordinate 3D display mode to the origin of the axis system, as a percentage of the worksheet, in centimeters or inches. |
| D3CurveFrameHeight | Specifies the height of the comment in the Coordinate 3D display mode, as a percentage of the worksheet, in centimeters or inches. |
| D3CurveFrameLnColor | Specifies the frame color type of comments in the Coordinate 3D display mode. |
| D3CurveFrameLnColRGB | Specifies the RGB values for the frame color of comments in the Coordinate 3D display mode. |
| D3CurveFrameLnType | Specifies the line style of the frame of comments in the Coordinate 3D display mode. |
| D3CurveFrameLnWidth | Specifies the line width of the frame of comments in the Coordinate 3D display mode. |
| D3CurveFrameWidth | Specifies the width of the comment in the Coordinate 3D display mode, as a percentage of the worksheet, in centimeters or inches. |
| D3CurveTxt | Specifies the text in comments in the Coordinate 3D display mode. |
| D3CurveTxtAlignment | Specifies the line alignment of comment text in the Coordinate 3D display mode. |
| D3CurveTxtBold | Specifies whether DIAdem displays the comment text in bold in the Coordinate 3D display mode. |
| D3CurveTxtColor | Specifies the font color of comment text in the Coordinate 3D display mode. |
| D3CurveTxtColorRGB | Specifies the RGB values for the font color of comment text in the Coordinate 3D display mode. |
| D3CurveTxtFont | Specifies the character set for comment text in the Coordinate 3D display mode. |
| D3CurveTxtItal | Specifies whether DIAdem displays the comment text in italics in the Coordinate 3D display mode. |
| D3CurveTxtSize | Specifies the font size of comment text in the Coordinate 3D display mode. |
| D3CurveTxtStrOut | Specifies whether DIAdem displays the comment text in strikethrough in the Coordinate 3D display mode. |
| D3CurveTxtUndl | Specifies whether DIAdem displays the comment text underlined in the Coordinate 3D display mode. |
| D3DataType | Specifies whether the data is available in triplet or matrix form. |
| D3LegPositionType | Specifies whether the legend of a 3D axis system is bound to an axis system, or whether you can position it freely. When the legend is bound to an axis system, DIAdem also moves the legend when you move the axis system. |
| D3LegPosSysRelatedX | Specifies the distance of the legend for a 3D axis system in x-direction. |
| D3LegPosSysRelatedY | Specifies the distance of the legend for a 3D axis system in y-direction. |
| D3LegPPositionType | Specifies whether the color legend of a 3D axis system is bound to an axis system, or whether you can position it freely. When the legend is bound to an axis system, DIAdem also moves the legend when you move the axis system. |
| D3LegPPosSysRelatedX | Specifies the distance of the color legend for a 3D axis system in x-direction. |
| D3LegPPosSysRelatedY | Specifies the distance of the color legend for a 3D axis system in y-direction. |
| GraphSheetCopy | Copies a worksheet. |
| GraphSheetInsertNew | Inserts a new worksheet below the current worksheet in DIAdem REPORT. |
| MainObjectName | Specifies the object that contains the curve section. |
| MarkerList | Specifies a marker symbol. |
| REPORTPrintAsGraphic | Specifies whether DIAdem saves the report temporarily as a graphic before DIAdem prints this graphic or displays it as a PDF file. Select this setting if your printer does not correctly display enhanced display options, such as transparent areas. If you select this setting, you cannot select any texts in the PDF documents you have created. |
| ReportRenderingMode: | Specifies the graphic display quality in DIAdem REPORT. A higher output quality may reduce the display speed. |
| CurveObjChnType | Specifies the type of channel. |
| CurveObjName | Specifies the name of a curve object. |
| GraphObjChnNameGet | Specifies the channel name of a curve. |
New Commands and Variables in DIAdem ANALYSIS
| ASIFilterType | Specifies the method of filtering for the ASI calculation. If you do not set this parameter, DIAdem filters using a moving average. |
| ChnFindXYValue: | Specifies the row number of a channel pair of which the values meet the given condition. |
| ChnFindXYZValue | Specifies the row numbers of a channel pair whose values meet the given condition. |
| ChVXYValue | Specifies the x- and y-values of a channel pair which meet the given condition. |
| ChVXYZValue | Specifies the x-, y-, and z-values of a triplet or matrix which meet the given condition. |
| D2SearchMode | Specifies a condition. |
| D3SearchMode | Specifies a condition. |
| DRIDampingCoefficient | Specifies the damping coefficient if the DRI calculation is free. |
| DRIDirection | Specifies the direction of the DRI calculation. If you do not set this parameter, DIAdem calculates the z-axis. |
| DRINaturalFrequency | Specifies the natural frequency of the dynamic system in rad/s if the DRI calculation is free. |
| XSearchValue | Specifies the x-value of the point which the condition refers to. |
| YSearchValue | Specifies the y-value of the point which the condition refers to. |
New Objects, Events, Methods, and Properties for DIAdem NAVIGATOR
New Objects, Events, Methods, and Properties for TDM Header
| Object: DataFileHeader and subobjects including their properties and methods | The DataFileHeader object provides methods, which you can use to read, write, modify, or delete channel properties, group properties, or file properties from TDM files or TDMS files. You also can use this object to read headers from DataPlugins. |
New Events, Methods, and Properties for VIEW
| Method: AppendLayout for View |
Loads the specified layout file into the current VIEW layout. |
| Property: MapMovingMode for Map | Specifies how DIAdem moves the map section when using cursor synchronization. |
| Event: OnContextMenuPointSelected | Triggers when the item in a context menu is selected in DIAdem VIEW. |
| Event: OnDblClick | Triggers when double-clicking an area in DIAdem VIEW. |
| Event: OnShowingContextMenu | Triggers when a context menu displays in DIAdem VIEW. |
| Property: ShowTrack for Map | Specifies whether DIAdem displays the value pairs for longitude and latitude as lines in the map view in the VIEW panel. |
| Property: TabBarVisible for Settings | Specifies whether DIAdem shows the tabs to organize the worksheets in the VIEW panel. |
Version 2010
New General Commands and Variables
| AppEndScript | Specifies which script DIAdem runs when the program ends. |
| AudioAutoRepeat | Specifies whether DIAdem restarts the audio output automatically at the end. If the value is TRUE, DIAdem starts the audio output automatically. |
| AudioBufferFillEvent | Specifies the user function that DIAdem calls when loading new data to the clipboard of the audio output. |
| AudioBuffersize | Specifies the number of values DIAdem uses for the buffer of the audio output. If you do not specify this value, DIAdem specifies the size of the buffer automatically. |
| AudioEndRow | Specifies the last channel row at which DIAdem ends the audio output. If you do not specify a value, if you specify a negative value, or if you specify a value larger than the channel length, DIAdem uses the last channel value. |
| AudioHandle | Specifies the handle of the audio output. |
| AudioLeftChn | Specifies the left channel for the audio output. |
| AudioOutClose | Stops the sound output of channels. |
| AudioOutGetSampleRate | Receives the sampling rate of the audio output. |
| AudioOutMute | Specifies whether the sound is on or off. If the value is TRUE, the sound is switched off. |
| AudioOutOpen | Starts the audio output of channels. For each audio output you receive as the return value a handle with which you end the audio output via the command AudioOutClose. |
| AudioOutResume | Continues the audio output. |
| AudioOutSetPosition | Specifies the position of the audio output in the specified play range. |
| AudioOutSetRange | Specifies the first and the last channel value of the audio output. |
| AudioOutSetSampleRate | Specifies the sampling rate of the audio output. |
| AudioOutSuspend | Pauses the audio output. |
| AudioOutVolume | Specifies the volume of the audio output as a percentage. |
| AudioOutWaitUntilEnd | Waits until DIAdem finishes the audio output. |
| AudioRightChn | Specifies the right channel for the audio output. If you do not specify a channel, DIAdem uses the left channel. |
| AudioSampleRate | Specifies in Hz the sampling rate DIAdem uses to generate audio signals. If you specify 0 or no value, DIAdem tries to specify the sampling rate from the properties wf_xunit_string and wf_increment. If these properties are missing or in an incorrect unit, DIAdem uses the value 44.1 kHz. |
| AudioStartRow | Specifies the first channel row from where DIAdem starts the audio output. If you do not specify a value or if you specify a negative value, DIAdem uses the first value of the channel. |
| AudioStartSuspended | Specifies that the audio output does not start directly. Use the commands AudioOutSuspend and AudioOutResume to stop or to continue the audio output. |
| CreateTime | Creates an object that contains the date and time with a nanoseconds resolution. |
| CurrentScriptName | Specifies the name of the script file currently running. |
| CurrentScriptPath | Specifies the path of the script file currently running. |
| HdCopy | Copies a channel header from one channel to another channel. |
| HdDel | Deletes an external channel header. |
| IsKeyPressed | Specifies whether the specified key was pressed. |
| KeyValue | Specifies the pressed key. |
| LoadedElementList | Specifies the ElementList object, which contains the loaded data elements. |
| ProgramVersionName | Specifies the name of a DIAdem version. |
| PropInheritanceMode | Specifies the properties of superordinate elements which DIAdem loads into the Data Portal together with an element from a data store. |
| PropNamingSchema | Specifies the name giving of a property name after loading into the Data Portal. If you load data from a DataFinder or a data store into the Data Portal, DIAdem names the properties of the data in accordance with these specifications. |
| UseNoValueOnCalcError | Specifies whether DIAdem terminates the calculation when an error occurs in the Calculation Manager, the Calculator, or the Calculate command, during the calculation. If the value is TRUE, DIAdem returns the result value NoValue and does not terminate the calculation with an error. |
| ViewSoftwareRendering | Specifies whether DIAdem uses the acceleration capabilities of the graphics board. If the value is TRUE, the graphics acceleration of the graphics card is disabled. Only disable graphics acceleration if problems with the display occur in 3D models. |
New Commands and Variables in DIAdem REPORT
| D2AxisGridDotsPerTick | Specifies the number of points between two ticks for the Dots per tick line type. |
| D2AxisSegmentChnX | Specifies in the number oriented mode the channel with the x-values of the segments of a 2D axis system. |
| D2AxisSegmentChnXName | Specifies in the name oriented mode the channel with the x-values of the segments of a 2D axis system. |
| D2AxisSegmentChnY | Specifies in the number oriented mode the channel with the y-values of the segments of a 2D axis system. |
| D2AxisSegmentChnYName | Specifies in the name oriented mode the channel with the y-values of the segments of a 2D axis system. |
| D2AxisSegmentColor | Specifies the color of the segments in a 2D axis system. |
| D2AxisSegmentColorRGB | Specifies the RGB values for the segment colors in a 2D axis system. |
| D2AxisSegmentOrientation | Specifies the orientation of the segments in a 2D axis system. |
| D2AxisSegmentsNo | Specifies the number of segments in a 2D axis system. |
| D2AxisSegmentTransparency | Specifies the percentaged transparency of the segments in a 2D axis system. A value of 100 is completely transparent, a value of 0 is opaque. |
| D2CurveFillColorMode | Specifies whether filling effects relate to the curve or the axis. If the filling effect relates to the axis, DIAdem does not use the entire color spectrum of a color shading for shorter curves. In this case it is easier to compare different curves. |
| D2CurveFillTransparency | Specifies the transparency of the filling in a 2D axis system. A value of 100 is completely transparent, a value of 0 is opaque. |
| D2CurveHaColorAuto | Specifies whether the bar filling is the same color as the curve. |
| D2LegGridLines | Specifies whether DIAdem displays separators in the legend of a 2D axis system. |
| D2LegTxtClip | Specifies whether DIAdem truncates the legend label of a 2D axis system at the edge of the legend column. |
| D2LegTxtWordWrap | Specifies whether DIAdem wraps the legend label of a 2D axis system at the edge of the legend column. |
| D2PolLegGridLines | Specifies whether DIAdem displays separators in the legend of a polar axis system. |
| D2PolLegTxtClip | Specifies whether DIAdem truncates the legend label of a polar axis system at the edge of the legend column. |
| D2PolLegTxtWordWrap | Specifies whether DIAdem wraps the legend label of a polar axis system at the edge of the legend column. |
| D3LegGridLines | Specifies whether DIAdem displays separators in the legend of a 3D axis system. |
| D3LegTxtClip | Specifies whether DIAdem truncates the legend label of a 2D axis system at the edge of the legend column. |
| D3LegTxtWordWrap | Specifies whether DIAdem wraps the legend label of a polar axis system at the edge of the legend column. |
| GraphObjNewName | Specifies the new name of an object in a report. |
| GraphObjRename | Renames an object in DIAdem REPORT. You can rename main objects and subobjects such as axes and curves. |
| GraphSubObjSelect | Selects a subobject such as a curve or an axis, in DIAdem REPORT. |
| OnReportCurveExpanding | Specifies the user command that DIAdem REPORT executes before displaying an expanded curve. |
| OnReportDropChannels | Specifies the user command which DIAdem REPORT executes when channels are dragged and dropped onto a 2D axis system, a 2D table, a 2D polar axis system, or a 3D axis system. |
| PicDefExpMarkBType | Specifies that DIAdem displays a marker at the beginning of expanding curves. |
| PicDefExpMarkColor | Specifies the marker color of expanding curves in 2D axis systems. |
| PicDefExpMarkColorAuto | Specifies whether the marker symbols of expanding curves are the same color as the curve. |
| PicDefExpMarkColorRGB | Specifies the RGB values of the marker colors of expanding curves in 2D axis systems. |
| PicDefExpMarkEType | Specifies that DIAdem displays a marker at the end of expanding curves. |
| PicDefExpMarkFillColor | Specifies the filling color for the markers of expanding curves in 2D curves. |
| PicDefExpMarkFillColorAuto | Specifies whether DIAdem uses the curve color as the filling color of the marker of expanding curves. |
| PicDefExpMarkFillColorRGB | Specifies the RGB values of the filling color for the markers of expanding curves in 2D curves. |
| PicDefExpMarkLWidth | Specifies the line width of the markers of expanding curves. |
| PicDefExpMarkNType | Specifies that DIAdem only displays the marker symbol of expanding curves at every n-th point on the curve. |
| PicDefExpMarkParamUse | Specifies whether DIAdem includes the Marker Type setting in expanding curves. |
| PicDefExpMarkRMode | Specifies the frequency of the markers of expanding curves. |
| PicDefExpMarkRType | Specifies that DIAdem displays the curve markers of expanding curves at every n percent of the curve length. |
| PicDefExpMarkSize | Specifies the size of the markers of expanding curves as a percentage of the worksheet. |
| ReportPrintTransparency | Specifies whether DIAdem includes the transparency of the color when printing. If you disable this setting, the printers that usually do not print when color transparency is set print the transparent color without transparency. |
| ReportVirtualPrintMemory | Specifies whether DIAdem manages the temporary printer data in the memory or whether DIAdem outsources the data to the hard drive, when printing and exporting a REPORT layout. DIAdem saves this information in the desktop file. |
| SubObjNo | Specifies the number of a subobject in DIAdem REPORT. |
| TextAlign1stRow | Specifies whether the anchor point for aligning text in DIAdem REPORT refers to the first text line or the complete text. The default value is FALSE and specifies that the anchor point refers to the complete text. This settings only applies to multiline text. |
| TextClean | Removes all characters that cannot be printed, from a string. In the 7-bit ASCII code the characters that cannot be printed are the values 0 to 31 and additionally in the unicode character-set the values 127, 129, 141, 143, 144, and 157. |
New Commands and Variables in DIAdem ANALYSIS
| ChnCWVCalc | Calculates the chest wall velocity that occurs when the chest is crushed by a pressure wave. The chest wall velocity allows statements about injuries to internal organs by overpressure waves which do not affect the ear. |
| ChnSavitzkyGolayFilter | Smooths a data channel with the Savitzky-Golay filter. |
| ChnSavitzkyGolayFilterWeighted | Uses weighting factors to smooth a data channel with the Savitzky-Golay filter. |
| ChnShockResponseSpectrum | Calculates the shock response spectrum (SRS) from an acceleration signal. The calculation is executed in accordance with ISO-Norm 18431-4:2007. The shock response spectrum describes the response to the acceleration of many single-degree-of-freedom systems which is a mass-damping-spring system with different natural harmonics. |
| OrdAFSigRefValue | Specifies the reference value when evaluating the results of the order analysis in the frequency area. |
| OrdATOSigRefValue | Specifies the reference value when evaluating the results of the order analysis in the time domain. |
| PolynomialOrder | Specifies the order of the polynomial. |
| SavitzkyGolayFilterWeighted | Specifies whether DIAdem uses weighting factors when smoothing with the Savitzky-Golay filter. |
| SRSAmplitudeType | Specifies the amplitude type of the shock response spectrum. |
| SRSDamping | Specifies the damping degree of the single-degree-of-freedom systems. |
| SRSEndFrequency | Specifies the end frequency of the shock response spectrum. |
| SRSFreqPerOctave | Specifies the number of frequencies per octave of the shock response spectrum. |
| SRSPulseDuration | Specifies the pulse duration of the shock response spectrum. If you specify 0, the pulse duration is valid for the entire measurement. |
| SRSRangeType | Specifies the time domain of the shock event. The start range extends over the pulse duration of the shock event. |
| SRSResultType | Specifies the result type of the shock response spectrum. |
| SRSStartFrequency | Specifies the start frequency of the shock response spectrum. |
| StatLowerQuartile | Receives the 0.25 quantile (lower quartile). |
| StatUpperQuartile | Receives the 0.75 quantile (upper quartile). |
New Objects, Events, Methods, and Properties for the Data Portal
| ChannelPreview Object | The ChannelPreview object provides the channel preview of the Data Portal. |
| Object: FilterForm | The FilterForm object accesses the filter settings in the Data Portal. |
| Method: Display for Structure | Changes the display of the Data Portal contents. |
| Method: IsElementDisplayed for Structure | Determines whether the Data Portal displays a specific channel group or a specific channel. |
| Method: IsElementPinned for Structure | Determines whether a specific element is pinned in the Data Portal. |
| Method: Pin for Structure | Pins or unpins an element in the Data Portal. |
| Method: Redraw for Portal | Redraws the contents of the Data Portal. |
| Method: ResetPinnedElements for Structure | Unpins all the pinned elements in the Data Portal. |
New Objects, Events, Methods, and Properties for Internal Data
| Collection: ElementList <Data> and subobjects including their properties and methods | Collection of elements in the script interface for internal data. Use the ElementList collection to access channels, channel groups, or the root. You also delete channels or channel groups or add new channels or channel groups. Every element of the collection ElementList is an Element. |
| Method: AddChannel for Channels <Data> | Copies in the script interface for internal data an existing channel in a collection of other channels. |
| Method: AddProperties for Properties <Data> | Adds copies of existing properties to the properties of an element (root, channel group, or channel), in the script interface for internal data. |
| Method: CreateElementList for Data | Generates in the script interface for internal data a collection of elements. Every |
| Method: Move for Data | Moves in the script interface for internal data a channel group or a channel to a different position in the Data Portal. |
| Property: Properties for Element <Data> | Contains the Properties collection that is associated with a ChannelGroup object in the script interface for internal data. |
| Property: Root for Data | Specifies the collection of all the channel groups and all the Properties of the data set in the script interface for internal data. |
| Property: Settings for Data | Specifies the access to the general DIAdem settings in the script interface for internal data. |
New Objects, Events, Methods, and Properties for DIAdem NAVIGATOR
| Object: DataStore and subobjects including their properties and methods | The DataStore object provides a data store without using the interface of DIAdem NAVIGATOR. |
| Object: Settings <Navigator> nd subobjects including their properties and methods | The Settings object provides access to general settings in DIAdem NAVIGATOR. |
| Method: IndexFolder for Browser <DataFinder> | Indexes a folder from the file browser of a DataFinder. |
| Method: UpdateSearchArea for Browser <DataFinder> | Refreshes the specified search area in the file browser of a DataFinder. |
| Property: OrderBy for Condition <DataFinder> | Specifies the Sorting order of the search results when searching with the DataFinder. |
| Search with interface | |
| Navigator.Display | Navigator.Display.CurrDataFinder: Returns the current DataFinder. To do so a DataFinder must be open in DIAdem NAVIGATOR. |
| Navigator.CreateQuery | Navigator.Display.CurrDataFinder.QueryForm.Conditions Specifies the search parameter for a search in a DataFinder without an interface. |
| Navigator.LoadQuery | Navigator.Display.CurrDataFinder.LoadQueryInfoSet: Loads in a DataDinder a file with the filename extension .tdq. |
| Navigator.SaveQuery | Navigator.Display.CurrDataFinder.SaveQueryInfoSet: Saves in a DataFinder the current query and the configuration of the search results list in a file with the filename extension .tdq. |
| Search without interface | |
| Navigator.CreateQuery | Navigator.Display.CurrDataFinder.LoadQueryInfoSet: Generates a query in a DataFinder with type transferred as a parameter. |
| Navigator.LoadQuery | Navigator.ConnectDataFinder.LoadQuery: Loads in a DataDinder a file with the filename extension .tdq. |
| Navigator.SaveQuery | Navigator.ConnectDataFinder.SaveQuery: Saves in a DataFinder the current query in a file with the filename extension .tdq. |
New Objects, Events, Methods, and Properties for DIAdem VIEW
| Object: Map and its properties and methods | The Map object provides a map display in DIAdem VIEW. Use the Map object to specify the properties of the map view and the channels to be synchronized with the view. |
| Object: Dialog and its properties and methods | The Dialog object provides information on a user dialog box in DIAdem VIEW. You can design the user dialog box with the dialog editor in DIAdem SCRIPT. |
| Object: Contour and its properties and methods | The Contour object provides a contour display in DIAdem VIEW. Use the Contour object to display a contour and isolines and to define the display mode. |
| Object: Segment and its properties and methods | The Segment object provides a segment in a 2D axis system in DIAdem VIEW. Use the Segment object to specify the segment properties. |
| Property: Sound for CurveChart2D | Specifies whether the sound is on when playing a waveform channel in a 2D-axis system. |
| Property: Sound for Video | Specifies whether the sound is enabled when playing a video. |
| Property: ZoomCursor for Video, and XBegin, XEnd, YBegin, and YEnd | Specifies which cursor DIAdem uses to zoom in a video in DIAdem VIEW. |
| Property: ZoomCursor for Picture, and XBegin, XEnd, YBegin, and YEnd | Specifies which cursor DIAdem uses to zoom in a graphic in DIAdem VIEW. |
New method for the units catalog
| Method: SetAsDefault for UsedUnits | Specifies a unit as the default unit of a physical quantity within a unit set in the units catalog. |
New Events, Methods, and Properties for User Dialog Boxed
| Object: ViewConnector | The ViewConnector object corresponds to the ViewConnector control in a user dialog box. |
| Method: RestoreWaitCursor for Dialog | Redisplays the cursor as an hourglass after the display of the hourglass was interrupted, for example, because of a dialog box call or a message display. |
| Property: Flex | Specifies the change in the size and position of the control when you scale a user dialog box during runtime. |
| Property: ShowDlgReducer for Dialog | Specifies whether the user dialog box contains a symbol in the title bar which reduces the dialog box to the title bar. |
New Events, Methods, and Properties for DataPlugins
| Object: Workbook and subobjects including their properties and methods | The Workbook object provides a workbook and the associated properties. |
New Events, Methods, and Properties for Calculations
| Method: RunSelected for CalculationSet | Executes selected calculations. The Selected property of a calculation specifies whether the calculation is selected. |
| Property: Tag for Calculation | Specifies any comment for a calculation. |
| Property: Tag for CalculationGroup | Specifies any comment for a calculation group. |
New events, methods, and properties for the CAN Converter
| Property: EnumSubstitution for ResultSettings | Specifies whether the CAN Converter replaces enumeration strings of a logfile that is to be converted in the data channel of the TDM file, by NoValues. |
Version 11.1
New General Commands and Variables
| ApplicationName | Specifies an additional text which DIAdem displays in the title bar. |
| AutEdSyntax | Specifies the syntax of the loaded file. |
| CANToTDM | Specifies the CANToTDM object that facilitates the conversion of CAN data logger files to a TDM file. |
| ClipBoardText | Contains the text from the clipboard. |
| CreateValueWithUnit | Generates a ValueWithUnit object. |
| GenXUnitPreset | Specifies the unit in which DIAdem generates the numeric channel. |
| HSLtoRGB | Converts a color value from the HSL model (Hue, Saturation, Luminosity) into the RGB model (Red, Green, Blue). |
| HSLValue | Specifies the HSL color value. |
| IconTargetPath | Specifies the absolute path where DIAdem saves the generated ICO file. If the path entry is blank, DIAdem saves the ICO file in the source path. |
| ImageAreaHeight | Specifies the height of the rectangular extract, in pixels. |
| ImageAreaWidth | Specifies the width of the rectangular extract, in pixels. |
| ImageAreaX | Specifies the distance between the rectangular extract and the left edge, in pixels. |
| ImageAreaY | Specifies the distance between the rectangular extract and the top edge, in pixels. |
| ImageFile | Specifies the name and the path of the graphic file. The following file types are supported: .bmp, .jpg, .tif, .wmf, .emf, .pcx, .png, and .gif. |
| ImageFileAreaToIconFile | Converts a rectangular extract of a graphic file into an ICO file. |
| ImageFileToIconFile | Converts a graphic file into an ICO file. |
| InteractionText | Specifies the text that DIAdem displays in a non-modal dialog box when the interaction is enabled. |
| OValue | Specifies the value of the quantity. |
| TextfromClipboard | Returns the contents of the clipboard as text. |
| TextToClipboard | Copies a text to the clipboard. |
| UniqueNameSep | Specifies which character DIAdem uses to append an index number to a name, when you assign the name of an existing channel or channel group to a channel or to a channel group. |
| UnitSymbol | Specifies the unit of the quantity. |
New Commands and Variables in DIAdem REPORT
| AreaIso | Specifies whether DIAdem displays a square or a rectangle. |
| AxisNo | Specifies the axis number. |
| D3CurveSymBackColor | Specifies the background color of the curve labels. |
| D3CurveSymBackColorRGB | Specifies the RGB values of the background color for the curve labels. |
| D3CurveSymBType | Specifies whether DIAdem displays the curve label at the beginning of the curve. |
| D3CurveSymCFormat | Specifies the format specifications for the curve label when DIAdem takes the values from an additional channel. |
| D3CurveSymChn | Specifies in the Number-oriented mode the additional channel from which DIAdem takes the curve label of the 3D curve. |
| D3CurveSymChnName | Specifies the additional channel from which DIAdem takes the labels for the 3D curve. |
| D3CurveSymCType | Specifies whether the text of the 3D curve labels contains values from a different channel. |
| D3CurveSymEType | Specifies whether DIAdem also displays the curve label at the end of the curve. |
| D3CurveSymFType | Specifies whether the curve label contains free text. |
| D3CurveSymIdxChn | Specifies in the Number-oriented mode the index channel for the additional channel from which DIAdem takes the labels of the 3D curve. |
| D3CurveSymIdxChnName | Specifies the index channel for the additional channel from which DIAdem takes the curve labels of the 3D curve. |
| D3CurveSymIFormat | Specifies the format specifications for the curve labels of the isovalues in the 3D curve. |
| D3CurveSymPFormat | Specifies the format specifications for the curve labels of the point number in the 3D curve. |
| D3CurveSymPosTyp | Specifies how DIAdem positions the curve label in relation to the curve point. |
| D3CurveSymSepar | Specifies the separators that DIAdem uses between the text of the curve label. |
| D3CurveSymXDelt | Specifies the fixed x-position of the curve label in relation to the axis origin. |
| D3CurveSymXFormat | Specifies the format specifications for the x-values of the 3D curve labels. |
| D3CurveSymYDelt | Specifies the fixed y-position of the curve label in relation to the axis origin. |
| D3CurveSymYFormat | Specifies the format specifications for the y-values of the 3D curve labels. |
| D3CurveSymZDelt | Specifies the fixed z-position of the curve labels in relation to the axis origin. |
| D3CurveSymZFormat | Specifies the format specifications for the z-values of the 3D curve labels. |
| D3LegPSclFirstLastOnly | Specifies that DIAdem labels only the first and the last value of the color legend. |
| ExBitsPerPixel | Specifies the color depth in bits per pixel, for a graphic that is to be exported. |
| ExBitsPerPixelA | Specifies the color depth in bits per pixel, for a graphic that is to be exported. |
| ExCompressType | Specifies the compression type for a graphic to be exported. |
| ExCompressTypeA | Specifies the compression type for a graphic to be exported. |
| GraphObjMoveToBackground | Moves a report object infront of all other report objects in a worksheet. |
| GraphObjMoveToForeground | Moves a report object behind all other report objects in a worksheet. |
| GraphObjPositionGet | Specifies the absolute position as a percentage of the worksheet size for an x-coordinate and an y-coordinate in the selected 2D axis system. For example, specifies the position of a point in an axis system to select it with an arrow. |
| GraphObjScalingUpdate | Refreshes the scaling of an axis system. |
| GraphObjSelect | Selects a report object in the current worksheet. |
| GraphObjUnSelectAll | Deselects all report objects in a worksheet. |
| XCoordinate | Specifies the x-coordinate in the 2D axis system. |
| YCoordinate | Specifies the y-coordinate in the 2D axis system. |
New Commands and Variables in DIAdem ANALYSIS
| CalcQuantityBased | Specifies whether DIAdem executes the calculations quantity-based in DIAdem ANALYSIS and in the Calculator. |
| Calculate | Uses the Calculator VBS syntax to calculate a formula in a script including the units. |
| CalculateSymbols | Specifies a list with symbol names, which are replaced in the formula with values. |
| CalculateTargetUnit | Specifies the unit symbol for the result of the calculation. |
| CalculateValues | Specifies a list of the values associated with the symbols. |
| CalculationSet | Specifies the CalculationSet object, which provides access to the subobjects, methods, and properties for working with calculation templates. |
| CCR | Specifies the number of the current cycle when a calculation template is executed in serial calculation. |
| ChnDRICalc | Calculates the Dynamic Response Index(DRI). The DRI value measures the probability of damage to the spine that can can occur during a vertical impact. The DRI value is a number without a dimension and is proportional to the maximum compression of the spine. |
| ChnDurPosCalc | Calculates the time at level. The time at level describes the maximum continuous time interval in which the amplitude of a signal exceeds a specific threshold. |
| ChnDurPosInjCalc | Calculates the time-at-level and the injury risk for positive limit curves. The time at level describes the maximum continuous time interval in which the amplitude of a signal exceeds a specific threshold. |
| DeskCalculationSet | Specifies the default file for the formula templates. |
| DRIRes | Receives the result of the DRI calculation. |
| HCDClipCopy | Specifies whether DIAdem transfers the HCD results to the clipboard. |
| HCDClipValue | Specifies whether DIAdem transfers the HCD results to the clipboard as values or as variable references. |
| HICClipCopy | Specifies whether DIAdem transfers the HIC results to the clipboard. |
| HICClipValue | Specifies whether DIAdem transfers the HIC results to the clipboard as values or as variable references. |
| HPCClipCopy | Specifies whether DIAdem transfers the HPC results to the clipboard. |
| HPCClipValue | Specifies whether DIAdem transfers the HPC results to the clipboard as values or as variable references. |
| THIVFlailSpace | Contains the flail space of the theoretical head. |
New Objects, Events, Methods, and Properties for the Data Portal
| ChannelPreview Object | The ChannelPreview object provides the channel preview of the Data Portal. |
| Object: FilterForm | The FilterForm object accesses the filter settings in the Data Portal. |
| Method: Display for Structure | Changes the display of the Data Portal contents. |
| Method: IsElementDisplayed for Structure | Determines whether the Data Portal displays a specific channel group or a specific channel. |
| Method: IsElementPinned for Structure | Determines whether a specific element is pinned in the Data Portal. |
| Method: Pin for Structure | Pins or unpins an element in the Data Portal. |
| Method: Redraw for Portal | Redraws the contents of the Data Portal. |
| Method: ResetPinnedElements for Structure | Unpins all the pinned elements in the Data Portal. |
New Objects, Events, Methods, and Properties for DIAdem NAVIGATOR
| Object: DataFinderSettings | The DataFinderSettings object provides a DataFinder configuration. |
| Collection: SearchAreas | Collection of all the search areas in a DataFinder configuration. |
| Object: SearchArea | The SearchArea object provides a search area in a DataFinder configuration. |
| Collection: ExcludeFolders | Collection of all the search area folders that the DataFinder ignores in a search. |
| Object: ExcludeFolder | In a DataFinder configuration the ExcludeFolder object provides a folder in a search area. The DataFinder excludes the folder from the search. |
| Object: IndexerSchedule | The IndexerSchedule object provides the settings for the indexer schedule in a DataFinder configuration. |
| Object: Indexer | The Indexer object provides the methods which you use to reindex files and folders. |
| Method: Refresh for DataFinder | Reads out the DataFinder configuration again. |
| Method: Reset for DataFinder | Removes files from the index that have an index timeout or an index failure. |
New Objects, Events, Methods, and Properties for the Bar Manager
| Object: Shell | The Shell object provides the DIAdem main window that can contain bars like a DIAdem panel. |
| Collection: UsedBars for Shell | Collection of all bars used in the DIAdem main window. |
| Method: GetUniqueID for ActionObjs | Checks whether the name of a bar element is valid and unique. |
| Method: GetUniqueID for Bars | Checks whether the name of a bar is valid and unique. |
| Method: Refresh for BarManager | Rebuilds the bars of the DIAdem main window and all visible, used bars of the current panel and refreshes the display. |
| Method: ResetCaption for ActionObjButton | Restores the label of the base type for buttons. |
| Method: ResetCaption for ActionObjCheckbutton | Restores the graphic of the base type for status display buttons. |
| Method: ResetCaption for ActionObjPopup | Restores the graphic of the base type for buttons that open a bar. |
| Property: Caption for ActionObjButton | Specifies the label of a bar element. |
| Property: Caption for ActionObjCheckbutton | Specifies the label of a bar element. |
| Property: Caption for ActionObjPopup | Specifies the label of a bar element. |
| Property: Shape for ActionObjButton | Specifies how DIAdem displays a bar element in a bar. |
| Property: Shape for ActionObjCheckbutton | Specifies how DIAdem displays a bar element in a bar. |
| Property: Shape for ActionObjPopup | Specifies how DIAdem displays a bar element in a bar. |
| Property: Style for Bar | Specifies how the bar elements are displayed within a bar. |
| Property: Visible for Bar | Specifies whether a bar is visible. |
New Objects, Events, Methods, and Properties for DIAdem VIEW
| Object: Contour | The Contour object provides a contour display in DIAdem VIEW. |
| Collection: ContourCurves | The ContourCurves object provides a contour display in DIAdem VIEW. |
| Object: ContourCurve | The ContourCurve object provides access to the contour of a contour display in DIAdem VIEW. |
| Object: Isoline | The Isoline object provides access to an isoline of a contour display in DIAdem VIEW. |
| Collection: LegendItems | Collection of the legend items in a 2D axis system or in a contour display in DIAdem VIEW. |
| Object: LegendItem | The LegendItem object provides information about a curve in a 2D axis system or in a contour display, in DIAdem VIEW. |
| Collection: Dimensions | Collection of all the Dimensions in DIAdem VIEW. |
| Object: Dimension | The Dimension object provides a cursor dimension in DIAdem VIEW. |
| Property: Abscissa for CurveChart2D | Specifies which cursor dimension DIAdem assigns to the x-axis of a 2D axis system in DIAdem VIEW. |
| Property: AxisLabeling for CurveChart2D | Specifies whether DIAdem displays the axis label in a 2D axis system in DIAdem VIEW. |
| Property: Height for CoordinateWnd | Specifies the height of the DIAdem VIEW coordinate window, in pixels. |
| Property: InterpolationMode for Model3D | Specifies how DIAdem interpolates the values data from neighboring model points for model points with no sensor. |
| Property: Ordinate for CurveChart2D | Specifies which cursor dimension DIAdem assigns to the y-axis of a 2D axis system in DIAdem VIEW. |
New Events, Methods, and Properties for User Dialog Boxed
| Method: IsValid for Dialog | Checks whether a user dialog box was closed with the OK button, the cancel button, or the Esc key or whether an error occurred which closed the user dialog box. |
| Method: RestoreWaitCursor for Dialog | Redisplays the cursor as an hourglass after the display of the hourglass was interrupted, for example, because of a dialog box call or a message display. |
| Property: InterpretedTextEnabled | Specifies in a user dialog box whether text with DIAdem expressions is interpreted. |
New Events, Methods, and Properties for DataPlugins
| Object: FileInfo | The FileInfo object contains information about the file that the DataPlugin is currently processing. |
New Object-Oriented Script Interface for Calculations
New Object-Oriented Script Interface for the Value-Unit Object
Version 11.0
New General DIAdem Commands and Variables
| AppRectangleGet | Specifies the size of a DIAdem window area. DIAdem returns a zero based array which contains the distance in pixel of the left, the upper, the right, and the lower edge to the screen origin. The screen origin is the top-left corner of the screen. |
| AppRectangleType | Specifies the window area of DIAdem. The value 0 corresponds to the DIAdem main window or the value 1 corresponds to the area below the last symbol of the panel bar. |
| BarManager | Specifies the BarManager object that provides access to the subobjects, methods, and properties for bar configuration. |
| CommonTimeFormat | Specifies the format string to be checked. Receives a universal time format after the CommonTimeFormatCheck command is called. |
| CommonTimeFormatCheck | Checks whether a time format is commonly applicable and specifies a universal format string. |
| Data | Specifies the data object that provides access to the subobjects, methods, and properties for working with internal data. |
| DirListGet | Generates a list with filenames. |
| FileDlgMultiSelect | Specifies whether one file or multiple files can be selected. If the value is TRUE, multiple files can be selected. |
| FileDlgNameList | Receives a field with all selected files including the path. |
| FileDlgShow | Calls the file selection dialog box. |
| IgnoreUnknownUnits | Specifies whether DIAdem ignores unknown units (True) or whether DIAdem outputs an error (False). |
| PathDlgShow | Opens a dialog box for path selection. |
| ResultUnitGet | Returns the symbol of the result unit for an arithmetic operation. |
| SourceUnit | Specifies the symbol of the source unit. |
| SourceUnit1 | Specifies the symbol of the second source unit. |
| TargetUnit | Specifies the symbol of the target unit. |
| TutorialBarOnOff | Specifies whether DIAdem displays the tutorial bar. If the value is TRUE, DIAdem displays the tutorial bar. |
| UnitCatalog | Specifies the UnitCatalog object that provides access to the subobjects, methods, and properties of the unit catalog. |
| UnitSet | Specifies the unit set. |
| ValueUnit | Specifies the numeric value of which DIAdem converts the unit. |
| ValueUnitConvert | Converts a numeric value from one unit to a different unit. |
| VirFree | Specifies the free memory space in a virtual storage. |
New Variables for the Data Portal
| DataSetMaxComm | Specifies the maximum number of comments in a header of a data set. |
| HideRegisterProp | Specifies whether DIAdem displays the register properties of a data set, a channel group, or a channel, in the properties display of the Data Portal. The register properties are the properties RegisterTxt1 to RegisterTxt3, RegisterInt1 to RegisterInt6, and RegisterVal1 to RegisterVal6. If you assign the value TRUE to the HideRegisterProp variable, DIAdem does not display the register properties. |
| GroupSetToDefault | Specifies whether the group is a default group. If the value is TRUE, the group is a default group. |
| Portal | Specifies the Portal object that provides access to the subobjects, methods, and properties in the DIAdem Data Portal. |
| PropIsVisible | Specifies whether a property in the Data Portal is visible. |
| UsePropTemplate | Specifies whether you define custom properties as a template for a data set, for channel groups, and for channels. When you load new data into the Data Portal or when you create new channel groups or channels, DIAdem adds the custom properties from this template to the data set, to the channel groups, and to the channels respectively. DIAdem generates the custom properties of a template in the data set as soon as you delete the internal data store. |
New Objects and Properties in DIAdem NAVIGATOR
| Collection: CellsSelection | The CellsSelection collection accesses the cells that are selected in the search results in DIAdem NAVIGATOR. |
| Collection: ColumnsSelection | The ColumnsSelection collection accesses the columns that are selected in the search results in DIAdem NAVIGATOR. |
| Collection: ElementsSelection | The ElementsSelection collection accesses the lines that are selected in the search results in DIAdem NAVIGATOR. |
| Property: CellsSelection for ResultsList | Specifies the cells that you have currently selected in the search results, in DIAdem NAVIGATOR. |
| Property: ColumnsSelection for ResultsList | Specifies the columns that you have currently selected in the search results, in DIAdem NAVIGATOR. |
| Property: ElementsSelection for ResultsList | Specifies the elements that you have currently selected in the search results, in DIAdem NAVIGATOR. |
| Method: Item for CellsSelection | Uses the index to access a selected cell in the search results in DIAdem NAVIGATOR. |
| Method: Item for ColumnsSelection | Uses the index to access a selected column in the search results in DIAdem NAVIGATOR. |
| Method: Item for ElementsSelection | Uses the index to access a selected element in the search results in DIAdem NAVIGATOR. |
| Property: Count for CellsSelection | Returns the number of cells that are selected in the search results in DIAdem NAVIGATOR. |
| Property: Count for ColumnsSelection | Returns the number of columns that are selected in the search results in DIAdem NAVIGATOR. |
| Property: Count for ElementsSelection | Returns the number of lines that are selected in the search results in DIAdem NAVIGATOR. |
| Property: ReIndexElement for Browser | Indexes a file in the file browser. |
| Property: ReindexElement for Indexer | Indexes a file in a search without the interface. |
| Property: Version for DataFinder | Returns the version number of the DataFinder as a double value. |
| Property: VersionNumber for DataFinder | Returns the version number of the DataFinder as text. |
| Property: DataFinderVersion for DataFinderDisplay | Returns the version number of the DataFinder as a double value. |
| Property: DataFinderVersionNumber for DataFinderDisplay | Returns the version number of the DataFinder as text. |
| Property: Name for Condition | Returns the name of a search condition in the search input area of the DataFinder, for example, C1 or C2. |
| Property: Size for Condition | Returns the number of values connected with OR in a search condition in a Search with the interface or in a Search without the interface in DIAdem NAVIGATOR. |
| Property: Values for Condition | Specifies a vector with values of a search condition. |
| Property: Logic for Conditions | Returns the logical operations of search conditions of the DataFinder in the search input area. |
| Property: DataType for Property | Specifies the data type of a property or of a custom property, in DIAdem NAVIGATOR. |
| Property: Default for Property | Specifies whether a property is a default property or a custom property, in DIAdem NAVIGATOR. |
| Property: DisplayName for Property | Specifies the display name of a property, in DIAdem NAVIGATOR. |
| Property: Hidden for Property | Specifies in DIAdem NAVIGATOR whether DIAdem displays the property of a data element on the DIAdem interface. |
| Property: Conditions for QueryForm | Specifies the search parameters for an advanced search in DIAdem NAVIGATOR. |
New Properties in DIAdem VIEW
| Property: CurrColumn for ChannelTable | Returns the column of a DIAdem VIEW channel table, that has the legend that includes the formula expression that uses this property. |
| Property: Events for View | Returns the names of the user commands assigned to an event in the DIAdem VIEW panel. |
| Property: XScalingMode for CurveChart2D | Specifies the zoom mode and the scroll mode in a 2D axis system in DIAdem VIEW. |
| Property: XScalingType for CurveChart2D | Specifies the type of the x-axis scaling in a 2D axis system in DIAdem VIEW. |
New Commands and Variables in DIAdem VIEW
| Model3DInputFile | Specifies the name of the 3D model file that is to be optimized. |
| Model3DOutputFile | Specifies the name of the optimized 3D model file. |
| Model3OptimizeAccuracy | Specifies the furthest distance between two points, up to which DIAdem combines the two points. |
| Optimize3DModelFile | Optimizes 3D model files by making DIAdem combine points and deletes parts of the model file that are irrelevant for DIAdem. |
New Commands and Variables in DIAdem ANALYSIS
| ChnConvertToUnitSet | Converts several channels according to a unit set. The default units of the unit set specify the respective target unit. |
| ChnGaussFitXY | Calculates a Gaussian curve fitting with the least square method, the least residual method, or the bisquare method. If required, DIAdem also generates the interpolation points channel necessary for the calculation. |
| ChnGaussFitXYWeighted | Calculates a Gaussian curve fitting with the least square method, the least residual method, or the bisquare method. DIAdem includes the y-channel weightings. If required, DIAdem also generates the interpolation points channel necessary for the calculation. |
| ChnGaussFitY | Calculates a Gaussian curve fitting with the least square method, the least residual method, or the bisquare method. |
| ChnGaussFitYWeighted | Calculates a Gaussian curve fitting with the least square method, the least residual method, or the bisquare method. DIAdem includes the y-channel weightings. |
| ChnGenLSFit | Specifies the k-dimensional linear curve values and the k-dimensional coefficients for linear fitting that best fit a k-dimensional curve using the least square method. |
| ChnGenLSFitWeighted | Specifies the k-dimensional linear curve values and the k-dimensional coefficients for linear fitting that best fit a k-dimensional curve using the least square method. DIAdem includes the y-channel weightings. |
| ChnNonLinearFitXY | Uses the Levenberg-Marquardt algorithm to specify the least squares of the coefficients a, which best fit the input pairs, which means they also best fit a non-linear function of the y = f(x,a) type. If required, DIAdem also generates the interpolation points channel necessary for the calculation. |
| ChnNonLinearFitXYWeighted | Uses the Levenberg-Marquardt algorithm to specify the least squares of the coefficients a, which best fit the input pairs, which means they also best fit a non-linear function of the y = f(x,a) type. If required, DIAdem also generates the interpolation points channel necessary for the calculation. DIAdem includes the y-channel weightings. If required, DIAdem also generates the interpolation points channel necessary for the calculation. |
| ChnNonLinearFitY | Uses the Levenberg-Marquardt algorithm to specify the least squares of the coefficients a, which best fit the input pairs, which means they also best fit a non-linear function of the y = f(x,a) type. |
| ChnNonLinearFitYWeighted | Uses the Levenberg-Marquardt algorithm to specify the least squares of the coefficients a, which best fit the input pairs, which means they also best fit a non-linear function of the y = f(x,a) type. If required, DIAdem also generates the interpolation points channel necessary for the calculation. DIAdem includes the y-channel weightings. |
| ChnResultUnitGet | Returns the symbol of the result unit if you perform an arithmetic operation on a channel. |
| ChnUnitConvert | Converts a channel to a different unit. |
| ChnUnitOperator | Specifies the operator. |
| ChnWfxUnitConvert | Converts the x-part of a waveform channel into a different unit. |
| GaussFitAlgorithm | Specifies the algorithm for Gaussian curve fitting. |
| GaussFitAmplitude | Receives the amplitude of the Gaussian curve fitting. |
| GaussFitCenter | Receives the center of the Gaussian curve fitting. |
| GaussFitClipCopy | Specifies whether DIAdem transfers the results of a Gaussian curve fit to the clipboard. |
| GaussFitClipValue | Specifies whether DIAdem transfers the results of a Gaussian curve fit to the clipboard as a value or as a variable reference. |
| GaussFitFctStr | Receives the setup function used by a Gaussian curve fit. |
| GaussFitInitCoef | Specifies the start values for the amplitude, the center, and the standard deviation of the Gaussian curve fitting. |
| GaussFitResidue | Receives the residue or the weighted mean error of a Gaussian curve fitting. If you select the Least absolute residual algorithm, the variable receives the absolute error of the weighted mean. If you use other algorithms, the variable does not receive an absolute value. |
| GaussFitStdDev | Receives the standard deviation of the Gaussian curve fitting. |
| GaussFitTolerance | Specifies the tolerance that specifies when to end the iterative fit of the amplitude, the center, and the standard deviation in the bisquare method for a Gaussian curve fitting. If the relative difference of the residual undershoots the tolerance in two successive cycles, the curve fitting process stops. If the tolerance is 0, DIAdem sets the tolerance to 0.0001. |
| GaussFitWeighted | Specifies whether DIAdem weights the y-values in a Gaussian curve fitting. |
| GenLSFitAlgorithm | Specifies the algorithm for the general LS linear fitting. |
| GenLSFitCovariance | Specifies whether DIAdem generates the covariance matrix for a general LS linear fitting. |
| GenLSFitMSE | Receives the mean squared error of a general LS linear fitting. |
| GenLSFitWeighted | Specifies whether DIAdem weights the y-values of the general LS linear fitting. |
| NonLinearFitClipCopy | Specifies whether DIAdem transfers the results of a non-linear curve fit to the clipboard. |
| NonLinearFitClipValue | Specifies whether DIAdem transfers the results of a non-linear curve fit to the clipboard as a value or as a variable reference. |
| NonLinearFitCoef | Receives the coefficients of a non-linear curve fitting setup function. |
| NonLinearFitCoefCount | Specifies the number of coefficients in the setup function of a non-linear curve fitting. |
| NonLinearFitCoefName | Specifies the names of the coefficients in the setup function of a non-linear curve fitting. |
| NonLinearFitCovariance | Specifies whether DIAdem generates the covariance matrix for a non-linear curve fitting. |
| NonLinearFitFctStr | Receives the setup function used by a non-linear curve fit. |
| NonLinearFitIndepVariable | Specifies the name of the independent variable in the setup function of a non-linear curve fitting. |
| NonLinearFitInitCoef | Specifies the initially received values for the coefficients of the setup function of a non-linear curve fitting. The success of the curve fitting depends on how close the initial values are to the result. |
| NonLinearFitMaxIterations | Specifies the maximum number of the fitting routine iterations of a non-linear curve fitting. If the number of iterations exceeds this value, the fitting process stops. |
| NonLinearFitModelFunction | Specifies the formula string of the setup function for the non-linear curve fitting in VBS syntax. |
| NonLinearFitMSE | Receives the mean squared error of a non-linear curve fitting. |
| NonLinearFitWeighted | Specifies whether DIAdem weights the y-values in a non-linear curve fitting. |
| StatResChnNameFormat | Specifies how DIAdem stores the input channel names of the descriptive statistics in a text channel. |
| StatResChnNames | Specifies whether DIAdem stores the input channel names of the descriptive statistics in a text channel. |
New Commands and Variables in DIAdem REPORT
| AreaBackFMode | Specifies the type of color shading for rectangles. |
| AreaBackFVariant | Specifies the color shading direction for rectangles. |
| AreaBackRGB2 | Specifies the RGB values of the second background color for the color shading of rectangles. |
| AreaShadow | Specifies whether and how DIAdem displays a shadow with the rectangle. |
| AreaShadowColor | Specifies the shadow color of a rectangle. |
| AreaShadowDx | Specifies the horizontal distance of the shadow for rectangles. |
| AreaShadowDy | Specifies the vertical distance of the shadow for rectangles. |
| AreaShadowRGB | Specifies the RGB values of the shadow color of a rectangle. |
| BackColorLst | Specifies a list of colors. |
| CmtFrameBackFMode | Specifies the type of color shading for comments. |
| CmtFrameBackFVariant | Specifies the color shading direction of comments. |
| CmtFrameBkColRGB2 | Specifies the RGB values of the second background color for the color shading of comments. |
| CompD3ScaleFrame | Specifies whether DIAdem uses the 3D autoscaling behavior that DIAdem used up to version 10.2. |
| D2AxisBackColRGB2 | Specifies the RGB values of the second background color for the color shading of 2D axis systems. |
| D2AxisBackFMode | Specifies the type of color shading for 2D axis systems. |
| D2AxisBackFVariant | Specifies the color shading direction of 2D axis systems. |
| D2AxisXUnitPreset | Specifies the unit for the y-axis. If this variable is not empty, DIAdem converts the channels to be displayed into this unit. If DIAdem cannot convert the unit, DIAdem does not display the data. |
| D2AxisYUnitPreset | Specifies the unit for the y-axis. If this variable is not empty, DIAdem converts the channels to be displayed into this unit. If DIAdem cannot convert the unit, DIAdem does not display the data. |
| D2ConstCTType | Specifies the type of coordinate label of the 2D curve. |
| D2CurveETBackColor | Specifies the background color of the curve end labels. |
| D2CurveETBackColorRGB | Specifies the RGB values of the background color for the curve end labels. |
| D2CurveFillColor | Specifies the color for the filled area of a 2D axis system. |
| D2CurveFillColorRGB | Specifies the RGB color for the filled area of a 2D axis system. |
| D2CurveFillColorRGB2 | Specifies the RGB values of the second color for the filled area of a 2D axis system. |
| D2CurveFillMode | Specifies the color shading type for the filled area of a 2D axis system. |
| D2CurveFillPattern | Specifies the pattern type for the filled area of a 2D axis system. |
| D2CurveFillPatternType | Specifies the pattern type for the filled area of a 2D axis system. |
| D2CurveFillVariant | Specifies the color shading direction for the filled area of a 2D axis system. |
| D2CurveSymBackColor | Specifies the background color of the curve labels. |
| D2CurveSymBackColorRGB | Specifies the RGB values of the background color for the curve labels. |
| D2LegBackFMode | Specifies the type of color shading of 2D legends. |
| D2LegBackFVariant | Specifies the color shading direction of 2D legends. |
| D2LegBackRGB2 | Specifies the RGB values of the second background color for the color shading of 2D legends. |
| D2LegPBackFMode | Specifies the type of color shading for 2D color legends. |
| D2LegPBackFVariant | Specifies the color shading direction of 2D color legends. |
| D2LegPBackRGB2 | Specifies the RGB values of the second background color for the color shading of 2D color legends. |
| D2PolLegBackFMode | Specifies the type of color shading for the legends of the polar axis system. |
| D2PolLegBackFVariant | Specifies the color shading direction for legends of the polar axis system. |
| D2PolLegBackRGB2 | Specifies the RGB values of the second background color for the color shading of legends of the polar axis system. |
| D2TabBackFMode | Specifies the type of color shading for tables. |
| D2TabBackFVariant | Specifies the color shading direction of tables. |
| D2TabBackRGB2 | Specifies the RGB values of the second background color for the color shading of tables. |
| D3CurveMarkColor | Specifies the marker color in 3D axis systems. |
| D3CurveMarkColorAuto | Specifies whether DIAdem displays the marker symbols in the same color as the curve. |
| D3CurveMarkColorRGB | Specifies the RGB color values of the marker in 3D axis systems. |
| D3CurveMarkFillColor | Specifies the filling color for the markers in 3D axis system. |
| D3CurveMarkFillColorAuto | Specifies whether DIAdem uses the color of the 3D curve as the filling color of the marker. |
| D3CurveMarkFillColorRGB | Specifies the RGB values of the filling color for the markers in 3D axis systems. |
| D3CurveMarkLineWidth | Specifies the lines width of the marker symbols in 3D axis systems. |
| D3CurveMarkSize | Specifies the size of the markers as a percentage of the worksheet in 3D axis systems. |
| D3CurveMarkType | Specifies the symbol that DIAdem uses as a marker in 3D axis systems. |
| D3LegBackFMode | Specifies the type of color shading for 3D legends. |
| D3LegBackFVariant | Specifies the color shading direction of 3D legends. |
| D3LegBackRGB2 | Specifies the RGB values of the second background color for the color shading of 3D legends. |
| D3LegPBackFMode | Specifies the type of color shading for 3D color legends. |
| D3LegPBackFVariant | Specifies the color shading direction of 3D color legends. |
| D3LegPBackRGB2 | Specifies the RGB values of the second background color for the color shading of 3D color legends. |
| D3TabBackFMode | Specifies the type of color shading for 3D tables. |
| D3TabBackFVariant | Specifies the color shading direction of 3D tables. |
| D3TabBackRGB2 | Specifies the RGB values of the second background color for the color shading of 3D tables. |
| GraphObjCloseCheck | Closes an object in a report after the parameters are set. |
| GraphObjOpenCheck | Opens an object in a report to set the parameters for the object. |
| PDFFormat | Specifies whether DIAdem saves the PDF files in the standard format or in the PDF/A archiving format. |
| PDFResolution | Specifies in PDF files the resolution of graphics. |
| PicBackColorRGB2 | Specifies the RGB values for the second background color for the color shading of a worksheet in DIAdem REPORT. |
| PicBackFMode | Specifies the color shading type of a worksheet in DIAdem REPORT. |
| PicBackFVariant | Specifies the color shading direction in a DIAdem REPORT worksheet. |
| TxtBackFMode | Specifies the type of color shading for rectangles. |
| TxtBackFVariant | Specifies the color shading direction for rectangles. |
| TxtBackRGB2 | Specifies the RGB values of the second background color for the color shading of rectangles. |
| UserDefColors | Specifies user-defined colors. |
New Commands and Variables in DIAdem SCRIPT
| AutEdWSDeskfile | Specifies the default file for the workspace of the DIAdem SCRIPT panel. |
| ScriptCmdIsLoaded | Checks whether a script file with user commands is already loaded or not. |
New Events, Methods, and Properties for User Dialog Boxed
| Event: EventChnListRefreshed() | Triggers in user dialog boxes when the Data Portal refreshes, if you assign the value 1 to the DataRefreshActive property. |
| Event: EventInitFinalize() for Dialog | Triggers in user dialog boxes after the dialog box and the associated controls are initialized. |
| Event: EventQueryClose(ByRef bCanClose, Reason) for Dialog | Triggers in user dialog boxes if the methods Dialog.OK and Dialog.Cancel are called, or if the OK button, the Cancel button, or the Esc button are pressed. |
| Method: ScrollCellInView(Row, Col) for XTable | Moves a cell of the extended table in user dialog boxes, into the visible range if this cell is not already visible. |
| Method: IsValid for Dialog | Checks whether a user dialog box was closed with the OK button, the cancel button, or the Esc key or whether an error occurred which closed the user dialog box. |
| Property: CursorPointer for XTable | Specifies in a user dialog box how the user dialog box displays the cursor on the data of an extended table. |
| Property: ObjectCode for Dialog | Specifies in user dialog boxes the name that you use to access the dialog box in a script if you want to edit the properties and events of the dialog box. |
| Property: DataRefreshActive for ChnComboBox | Specifies whether the user dialog box automatically refreshes the selection terms of a channel selection list if the names or the positions of the channels in the Data Portal change. |
| Property: DataRefreshActive for ChnListBox | Specifies whether the user dialog box automatically refreshes the selection terms of a channel selection list if the names or the positions of the channels in the Data Portal change. |
| Property: ShowAsToolWindow for Dialog | Specifies whether the user dialog box appears as a symbol bar. |
| Property: ShowTitleMenu for Dialog | Specifies whether the user dialog box has the Close symbol in the header. |
New Commands and Variables for User Dialog Boxes
| SUDDefLoad | Specifies a SUD file that contains one or more user dialog boxes. |
| SUDDlgArgument | Specifies the transfer parameter for a user dialog box. In the SUD editor you use the methods GetArgument and SetArgument to access the transfer parameters. |
| SUDDlgName | Specifies the name of a user dialog box to be displayed. |
| SUDFileName | Specifies the name of a SUD file. |
| SUDNonModalDlgCount | Receives the number of the non-modal user dialog boxes. |
| SUDNonModalDlgId | Specifies the number or the name of a non-modal user dialog box. |
| SUDNonModalDlgLst | Receives the list of all non-modal user dialog boxes. |
New Object-Oriented Script Interface for the Units Catalog
New Object-Oriented Script Interface for Internal DIAdem Data
New Object-Oriented Script Interface for the Data Portal