Self-Calibration for the NI 9205 and NI 9206 (FPGA Interface)

CompactRIO Reference and Procedures (FPGA Interface)

Edition Date: June 2010

Part Number: 370984T-01

»View Product Info

Self-Calibration adjusts the calibration constants stored onboard the module. You can perform a self-calibration at any time to account for changes in environmental conditions. You can enable self-calibration on the C Series Module Properties dialog box.

Enabling Self-Calibration on the NI 9205 or NI 9206 allows access to the Write Self-Calibration Constants and Restore Last External Calibration Constants module methods.

Caution Caution  The Write Self-Calibration Constants and Restore Last External Calibration Constants method nodes must be used with the example VI to prevent damaging the module.

Refer to the 9205 Self-Calibration VI in the labview\examples\CompactRIO\Module Specific\NI 9205\NI 9205 Self Calibration\NI 9205 Self Calibration.lvproj for an example of self-calibration.

WAS THIS ARTICLE HELPFUL?

Not Helpful