You are here: NI Home > Support > Product Reference > Manuals > LabVIEW System Identification Assistant 4.0 Help

Computes a Nyquist plot for a system model. This step computes the frequency response function (FRF) for one input-output pair of a system model. The step then presents the FRF with the real part versus the imaginary part, or Nyquist plot.

Parameter	Description
Nyquist plot	Displays the Nyquist plot of the system model.
Input Model	Contains the following option: Model—Specifies the estimated model to use for Nyquist analysis.
Configuration	Contains the following options: Input source—Specifies the input source type to compute the transfer function. You can select stimulus or noise. Graph Settings—Contains the following option: Confidence level—Specifies the confidence interval of the FRF. The confidence radius equals confidence level times the standard deviations of the FRF. The default is 99%. Magnitude unit—Specifies the type of scaling used for the magnitude axis. You can choose from the following scaling types: dB (default) linear Frequency Information—Contains the following options: Start frequency—Specifies the starting frequency of the Nyquist plot. The default is 0.01. End frequency—Specifies the end frequency of the Nyquist plot. The default is 0.5. Number of bins—Specifies the number of frequency points at which frequency responses are computed. The default is 1000. Interval type—Specifies the type of scaling used for the frequency axis, or x-axis. You can choose from the following scaling types: logarithmic (default) linear