|NI-RFSG 18.1 Help|
|NI-RFSG 18.2.1 Help|
|NI-RFSG 19.1 Help|
|Access||Coercion||High Level Functions|
Specifies the Reference Clock source. To set this attribute, the NI-RFSG device must be in the Configuration state. Only certain combinations of this attribute and the NIRFSG_ATTR_PXI_CHASSIS_CLK10_SOURCE attribute are valid, as shown in the following table.
|Note The PXI-5670/5671 and PXIe-5672 devices also allow you to drive the PXI 10 MHz backplane clock on PXI chassis only using the NIRFSG_ATTR_PXI_CHASSIS_CLK10_SOURCE attribute.|
|NIRFSG_VAL_ONBOARD_CLOCK_STR||Uses the onboard Reference Clock as the clock source.|
PXIe-5840 with PXIe-5653—Lock to the PXIe-5653 onboard clock. Connect the REF OUT (10 MHz) connector on the PXIe-5653 to the PXIe-5840 REF IN connector. Configure open NI-RFSA sessions to the device to use NIRFSA_VAL_REF_IN_STR for the PXIe-5840 or NIRFSA_VAL_REF_IN_2_STR for the PXIe-5840 with PXIe-5653.
|NIRFSG_VAL_CLK_IN_STR||Uses the clock signal present at the front panel CLK IN connector as the Reference Clock source. This value is not valid for the PXIe-5644/5645/5646 or PXIe-5820/5840/5840 with PXIe-5653.|
|NIRFSG_VAL_REF_IN_STR||Uses the clock signal present at the front panel REF IN connector as the Reference Clock source.|
PXIe-5840 with PXIe-5653—Lock to the PXIe-5653 onboard clock. Connect the REF OUT (10 MHz) connector on the PXIe-5653 to the PXIe-5840 REF IN connector.
|NIRFSG_VAL_PXI_CLK_STR||Uses the PXI_CLK signal, which is present on the PXI backplane, as the Reference Clock source.|
|NIRFSG_VAL_REF_IN_2_STR||This value is valid on only the PXIe-5840 with PXIe-5653. NI-RFSG locks the Reference Clock to the clock sourced at the PXIe-5840 REF IN terminal that is already configured by an NI-RFSA session. Connect the PXIe-5840 REF OUT connector to the PXIe-5653 REF IN connector. Configure open NI-RFSA sessions to the device to use NIRFSA_VAL_REF_IN_STR for the PXIe-5840 or NIRFSA_VAL_ONBOARD_CLOCK_STR for the PXIe-5840 with PXIe-5653.|
|NIRFSG_VAL_PXI_CLK_MASTER_STR||This value is valid on only the PXIe-5840 with PXIe-5653. NI-RFSG configures the PXIe-5653 to export the Reference Clock, and configures the PXIe-5840 to use NIRFSG_VAL_PXI_CLK_STR. Connect the PXIe-5653 REF OUT (10 MHz) connector to the PXI chassis REF IN connector. For best performance, configure all other devices in the system to use NIRFSG_VAL_PXI_CLK_STR as the Reference Clock source.|
Default Value: NIRFSG_VAL_ONBOARD_CLOCK_STR
Supported Devices: PXI-5610, PXIe-5644/5645/5646, PXI/PXIe-5650/5651/5652, PXIe-5653/5654/5654 with PXIe-5696, PXI-5670/5671, PXIe-5672/5673/5673E, PXIe-5820/5840