niRFSG Write P2P Endpoint (I16) VI

NI RF Signal Generators Help (NI-RFSG 18.1)


Edition Date: June 2018
Part Number: 371025V-01
View Product Info

Download Help (Windows Only)


NI-RFSG 18.1 Help
NI-RFSG 18.2.1 Help
NI-RFSG 19.1 Help

Writes an array of 16-bit integer data to the peer-to-peer endpoint. Use this VI to write initial data from the host to the endpoint before starting generation to avoid underflow when you start the generation.

Supported Devices: PXIe-5673E

Related Topics

Configuring a Peer-to-Peer Stream—Refer to this topic for more information about configuring a stream.

Configuring Flow Control

Starting Peer-to-Peer Generation

Reconfiguring a Stream

niRFSG Write P2P Endpoint (I16)

/images/reference/en-XX/help/371025V-01/cio.gif

instrument handle identifies your instrument session. instrument handle is obtained from either the niRFSG Initialize VI or the niRFSG Initialize With Options VI.

/images/reference/en-XX/help/371025V-01/cstr.gif

stream endpoint is the stream endpoint FIFO to configure.

/images/reference/en-XX/help/371025V-01/c1di16.gif

interleaved IQ Data specifies the array of data to write into the endpoint FIFO. The binary data is left-justified.

/images/reference/en-XX/help/371025V-01/cerrcodeclst.gif

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

/images/reference/en-XX/help/371025V-01/iio.gif

instrument handle out passes a reference to your instrument session to the next VI. instrument handle out is obtained from the niRFSG Initialize VI or the niRFSG Initialize With Options VI.

/images/reference/en-XX/help/371025V-01/istr.gif

stream endpoint out specifies which stream resources to use.

/images/reference/en-XX/help/371025V-01/ierrcodeclst.gif

error out contains error information. This output provides standard error out functionality.

WAS THIS ARTICLE HELPFUL?

Not Helpful