RF:Advanced:Correction Temperature Property

NI RF Signal Generators Help (NI-RFSG 18.1)


Edition Date: June 2018
Part Number: 371025V-01
View Product Info

Download Help (Windows Only)


NI-RFSG 18.1 Help
NI-RFSG 18.2.1 Help
NI-RFSG 19.1 Help

Short Name: Correction Temperature

Property of niRFSG

Specifies the temperature, in degrees Celsius, to use for adjusting the device settings to correct for temperature changes. If you set this property, NI-RFSG uses the value you specify and therefore no longer uses the actual device temperature as the correction temperature. If you do not set this property, NI-RFSG checks the current device temperature in the Committed state and automatically sets the value of this property.

Note  Resetting this property reverts back to the default unset behavior.
Note  Use this property only when your application requires the same settings to be used every time, regardless of the temperature variation. In these cases, it is best to ensure that the temperature does not vary too much.

PXIe-5820/5840: This property is read only.

Supported Devices: PXIe-5611, PXI/PXIe-5650/5651/5652, PXIe-5653, PXIe-5673/5673E, PXIe-5820/5840

Remarks

The following table lists the characteristics of this property.

Datatype fD
PermissionsRead/Write
High-level VIs N/A
Channel-based No
ResettableYes

WAS THIS ARTICLE HELPFUL?

Not Helpful