RF:Frequency Tolerance (Hz) Property

NI RF Signal Generators Help (NI-RFSG 18.1)


Edition Date: June 2018
Part Number: 371025V-01
View Product Info

Download Help (Windows Only)


NI-RFSG 18.1 Help
NI-RFSG 18.2.1 Help
NI-RFSG 19.1 Help

Short Name: Frequency Tolerance (Hz)

Property of niRFSG

Specifies the allowable frequency error introduced during the software upconversion process. NI-RFSG may introduce a frequency error up to the specified amount to optimize computational speed and onboard memory usage while upconverting phase-continuous signals.

If the Phase Continuity Enabled property is set to Disable, the Frequency Tolerance (Hz) property is ignored and the driver does not introduce a frequency error. On devices that do not use software upconversion, this property is ignored. The PXI-5670 always uses software upconversion, and the PXI-5671 uses software upconversion for I/Q rates greater than 8.33 MS/s. To set this property, the NI-RFSG device must be in the Configuration state.

Supported Devices: PXI-5670/5671

Default Value: 50 Hz

Related Topics

Phase Continuity

Remarks

The following table lists the characteristics of this property.

Datatype fD
PermissionsRead/Write
High-level VIs N/A
Channel-based No
ResettableYes

WAS THIS ARTICLE HELPFUL?

Not Helpful