|NI-RFSG 18.1 Help|
|NI-RFSG 18.2.1 Help|
|NI-RFSG 19.1 Help|
Short Name: Output Port
Property of niRFSG
Specifies the connector(s) to use to generate the signal. To set this property, the NI-RFSG device must be in the Configuration state.
You must write complex I and Q data for all options. The Q data has no effect if you set this property to I Only and set the IQ Out Port Carrier Frequency property to 0. If you set the IQ Out Port Carrier Frequency property to a value other than 0, the onboard signal processing (OSP) frequency shifts I and Q as a complex value and outputs the real portion of the result on the I connector(s) of the device.
If you set the Output Port property to I Only or IQ Out, the IQ Out Port Terminal Configuration property applies.
Supported Devices: PXIe-5644/5645/5646, PXIe-5820/5840
PXIe-5644/5645/5646, PXIe-5840: RF Out
PXIe-5820: IQ Out
|RF Out (14000)||
Enables the RF OUT port. This value is not valid for the PXIe-5820.
|IQ Out (14001)||
Enables the I/Q OUT port. This value is valid on only the PXIe-5645 and PXIe-5820.
|Cal Out (14002)||
Enables the CAL OUT port.
|I Only (14003)||
Enables the I connectors of the I/Q OUT port. This value is valid on only the PXIe-5645.
The following table lists the characteristics of this property.